Separate names with a comma.
Oops, thought BMW was full plug-in lithium.......that's probably what I'd be looking for in that size (Tesla X is priced ridiculously high).
I haven't really considered it myself primarily because up here I need to get heat in the car in winter so my biggest issue for MPG is keeping the...
Yep, both the battery and the inverter sucks to get stuck buying from the dealer so best to have a boneyard one on hand if you have higher mileage...
I don't know how much heat is really generated in the process but there's a reason why the batteries from up north last alot longer in use so to...
Biggest problem with those pre-2008 HiHy's is the inverter going out on them (often at the least opportune time) so having an extra one of those...
Not sure but there are 3 separate controllers on the Prolong setup if that helps. 2006 - 2013 Toyota Highlander Hybrid Installation...
Nice, I'd love to pick one of those up from them too, seems alot easier than doing the discharges manually.
Seem like you could just buy the HA fan harness for around $180 and then build the charger yourself and hook it up, should work if you wanted to...
Man, great price on that, definitely worth picking up. The battery has 3 fans in there, not just one to control, but would be curious if you end...
Those are great, you should have no problems with one like that. I've since added a Prolong charge/discharge setup and use it during winter so...
Yep, bought the car sight unseen for an amazing price back in 2012 (had around 200k Kms when I got it) and assumed the battery was bad (turns out...
New battery modules are really only available to Toyota so even if Dorman did a good job rebuilding them it's hard to see what specs they use...
I looked for forums too and found nothing and most of the systems are similar enough (you can see my battery rebuild here too).
Traction battery definitely needs to be grid charged, not good to drain it too far under heavy load. Clean the MAF sensor (check air filter) and...
I was assuming just a converter was cut off, if the whole pipe is missing you're right, it's pretty much dealer only.........too much aftermarket...
I would just weld in an Eastern aftermarket converter (eastern P/N 40544) and be done with it.
Much better data this time around! The ones you highlighted are definitely bad but in addition it also looks like #13 is NG and #16 and #19 are...
Couple of problems here..... 1) A 35w load is not nearly enough, minimum of 55w/65w high/low beams on together (120w) 2) Time for each test must...
You should not be losing tranny fluid if the seals are all in good shape. There are basically 2 reasons seals fail like that: 1) Axle is grooved...
A lack of tranny fluid could cause all sorts of issues (ie excessive heat, shorting, friction, etc) which the ECU could signal as possible...
