Separate names with a comma.
You are using CygWin, right? If so then for COM3 you should use /dev/ttyS2 not 3. Is 115200 the highest baud rate for your OBD reader? It...
Good! Please post a picture here: Pictures | Screen Shots - Post yours here. | PriusChat when you get it up and running. Thanks!
PriiDash does show the brake pedal pressure sensor reading but that's different from the brake light switch. In a future version I can add the...
Do you have some kind of extended warranty that goes beyond 100K miles?
If someone wants to push the limit of the car in a deserted parking lot that's fine with me. Doing that on a highway is nothing but reckless as...
I had to drive through wind and rain on the highway under hurricane affected weather recently. My 2009 with stock tires at ~ 50 psi did not feel...
Maybe easier to fashion a box at the passenger side foot well that takes the cold air from the existing foot vent.
If there is a weak module in the HV battery pack then it would almost certainly be further damaged by force charging to full 8 green bars.
The name of the serial port under Cygwin is not "COM8", thus the problem. I will look it up and get back to you. From google:
Yes use Fluid to modify the UI and any C++ editor to modify the code. Good luck! Please post further questions in the forum:...
Thanks! Yes I use C/C++ and you can get all the details on the PriiDash homepage and PriiDash page at SourceForge.
Most likely it has always been the 12V battery. I would look for a mechanic more familiar with Prius to take care of the car if I were you. Good...
I thought it was just me. I guess it is the car after all.
Just to add a piece of data: my 12V battery hasn't measured above 11.5V with headlights on for over a year now. It seems still working fine but YMMV.
From Toyota: Toyota Parts and Service From our resident expert: 60K maintenance - what is needed | PriusChat
