Separate names with a comma.
In some special cases like this thread PriiDash(TM): Enhanced Instrument Panel / Data Logger - Now Open Sourced! | PriusChat where I post the...
2013-05 new release This new version adds capability to read generic DTCs. The Gauge Window is changed to wide format. Sorry I haven't done much...
I see. I think the general approach is to use engine power going uphill and to glide downhill. Regarding the MFD arrows I am guessing it's related...
IIRC Hobbit said in one of the posts that he found 15 kW engine output to be the best. Note that the RPM for 15 kW is not constant, but speed...
A general FYI: "Generator" and "Motor" are listed under covered parts of California emission control warranty in my 2009 Prius warranty booklet.
Well I remembered it differently: it had nothing to do with the recall and was caused by a fuse issue according to another member:
+1 In addition, the HV battery is being charged during warm-up only if the car is in park. Overall one should get better fuel economy by warming...
Thin is enough; tall is irrelevant.
Are you talking about the overhead push-open sunglasses holder? That would be too bad if they got rid of it in the gen 3 Prius. Another thing I...
Given the fact that the nut may have been weakened by the heat I would get a new nut to be safe. A new nut won't be that expensive, would it?
Is the worn main bearings the cause of the oil consumption or are they separate issues?
If the 12V battery is OK (it seems) then I would check the aftermarket modification for loose connections. Good luck!
So when you turn the fan off your display doesn't go blank? Mine does.
Thank you Ed! Found a document on line about the resolver connector: http://www.ocprius.com/SSC50-P-index.pdf
Just got back from the recall for steering and inverter coolant pump and found out that the dealer washed the engine bay. :mad: There are so many...
If the car runs fine and can connect to a different scanner then the car should be OK. Try disconnect the 12V for half an hour for the ECUs to...
Did you follow the instruction to turn the car on first before plugging in the ScanGauge2? According to this thread Just hooked up ScanGauge II...
Thank you for the precise instructions as always! I did let it cool overnight. I will try pull harder next time. Yes I removed the plastic cover....
OK really dumb question: how do I open the cap? I unscrewed it less than a turn and it loosened but still couldn't be removed easily. Since the...
Try Toyota Owners Official Web Site: Service Coupons, Owner's Manuals, Service Scheduling And More or Vehicle Owners | Safercar -- National...
