Separate names with a comma.
Neither battery has had charging from an outside source, verified by a call to my friend. I think the reason for the high under load voltage is...
Yes, but look for those that come with the software and drivers unless you want to download it from the net. John
It detects which pair of modules "block" (14 pairs or blocks in the gen2 Prius) tying the problem down to 2 modules. There are 6 cells in each...
Be aware that the battery ECU does not come with the "new" battery although it is inside the case. This will have to be changed over. John
It is noticeable that the engine and inverter coolant are not changed together in the Australian version. Engine at 8years 160,000km Inverter at...
A quick update on the batteries fitted in both my own car "now 5 years old" and the battery fitted at the beginning of this thread in my friends...
You can download the latest software there is no difference with the VCI's. Mine is 5 years old with no version number and I am running Techstream...
Yes. The idea is to stop the peak detection from operating forcing the charger to input the 7250 mah charge before cutting out. John
Yes but you can also download the latest from the Techstream European web site web site for free. John
Why? The later Techstream covers new cars and any updates to systems. The "cable" remains the same it is the system on the computer that alters. John
20 mV
Is it possible to turn off the peak setting or turn it to zero or a higher setting. This setting stops the charging process when it see,s a cell...
Looking at module 9 it ever received a charge of around 0130 so again it cannot give out more than was put in. Since the module a somewhat less...
Module 9 does appear to be faulty, but 20 & 21 show final discharge figures that are good at 5851 & 5721. The input figures on these cannot be...
In the UK I have a disc supplied with the VCI version 7.20.037 scanned with AVG & McAfee. Both report no virus found. There are many sources on...
My advice would be to buy a Mini VCI (Ebay) and check the codes for yourself. This will be much cheaper and more informative than going to the...
P0A80 code indicates a battery fault, but there should be other codes to give an indication of where that fault is, and what the problem is. John
I did tell you it would get hot. Surprising isn't it. John
Divide the amount of water by 5. So 350 divided by 5 = 70grams. 20% is 1/5th John
Leave some room in the container for adding the KOH and possible boiling. John
