Separate names with a comma.
If there is flex it will destroy anything so any of these short or slightly longer studs prevent flexing... Of course someone can observe flex by...
Absolutelly right... That is why it screws only 13mm out of 23 that the studs extrudes from hub surface! While the toyota rims screws 20 out of...
Actually I did test them, and the car runs fine, but since I measured them I have noticed that the nuts screw 13 mm instead of 20 that did on the...
Lug nuts can take this extra 10 mm, actually they have more than10mm to spare, if i decide to return to the original rims which I am planing to...
Hi , I bought some days ago some aftermarket 17"rims that I would like to add to my car(Gen3 2010)! Since they have some diference to the...
Yup, but since this version never imported in my country , the only way to have a phev is diy... And as it seems the 2nd gen that was using canbus...
Well it seems that in gen3 the canbus doesnot take place between the battery managment module and the hybrid ecu... Actually even if it is not...
Hey guys, I wonder if anyone knows wat are the can bus pins on the battery ecu plug... ??? It seems that there might be some succes after...
Well , I have noticed that the battery is more limited after this campain... When i am going downhill i can see the engine start like if it was...
The campaign they applied was the LGG76B have anyone any idea what is it doing to the car? As far i have only noticed what i refer in my previus...
Hi 2 days ago I visited toyota dealer and they offered to my 2010 prius an "necessary" update campaign for free that was available for my car......
Well after some more play around... I will prepare for a test that i will do next month probably... I have set a simple double arduino setup that...
Hi everybody! I would like some special info if someone already knows about it... It regards the physical canbus messages between the nods..... As...
Well after all it seems viable... actually the best solution I bellieve that is a batery tap emulator and spoofing the soc% through the can-bus!...
Well , it seems right, since it is in the relative "young" side of it's age ans still have warranty for the battery is normal that very few have...
As far as I understand calcars and engineer are very similar approaches, as i do understand both charge the main nimh pack... calcars with alot of...
Hi Guys, I have been researching about the concept....... I have seen more solutions now... I believe I will stick to the original plan of using...
And the truth is that i will monitor the total batery behavior... I have seen some reference that the batery controler adapts to current available...
Also as regards the total cells as far as I know... The gen3 have the same layout with Gen2 168 nimhs in 28 modules of 6 cells (7.2 nominal) that...
Wow thanks alot for your replys! Well as regards the type of cells that will be used... 56 liions have a nominal of3.6 per cell so 201.6v same...
