Separate names with a comma.
Except, the cutoffs have rectangular cutouts separate from the cutoffs, sometimes referred to as "squirrel finders". That's why there are two...
No, they won't fit. They have a 5 x 114.3mm bolt pattern. The Gen 3 Prius has a 5 x 100mm bolt pattern. The 5 x 114.3 bolt pattern would fit the...
Like the plastic oil filter housing, the plastic on the oil filler cap tends to swell and becomes tight. .
I have no problem removing my oil filler cap with the engine cover on. I use a large adjustable wrench with smooth jaws to loosely break the cap...
FWIW, I used the Asian red coolant from NAPA in both coolant loops in our 2011. .
Are you sure it's completely empty? There's usually a good bit of coolant in the heater core and hoses that doesn't get drained. That's why the...
I believe the part that shorted out contained a capacitor. Since it was a part of the ballast assembly, you should replace the ballast, along with...
That ballast looks like it's toasted, or is it just dirty? I'd replace the ballast and the bulb, not just the bulb. That's one of those...
I have the same 'Softex", fake leather steering wheel on my 2016 Toyota Corolla S plus. I put a genuine leather stitched on steering wheel cover...
Yes it did. I have installed them on three different vehicles so far (2011 Prius, 2014 Corolla, 2016 Corolla) with no problems. They basically...
This is not accurate, only the Prius v wagon has a 5 x 114.3 bolt pattern. The Gen 2 through Gen 4 Prius models (not the v wagon) are all 5 x 100....
Answer is no, but if you absolutely must assist another vehicle, this is the safe way to prevent any damage to your sensitive electrical elements...
If you have a Gen 3, I can tell you that these LED foglights are very, very bright. AUDEXEN LED Fog Lights with DRL Compatible with Toyota...
Is this for a Gen 2 or Gen 3? .
I've still got the projector foglights I posted in the other thread you were on. They'd be crazy bright with HID ballasts and bulbs. Some LED...
First off, what year do you have? I can say that the foglight mounting is the same on our 2011 Prius, a 2014 and 2016 Corolla, and a 2010 Camry...
Did you use hubcentric rings to mount the wheels? It's important to ensure that your wheels are exactly centered on the hubs when mounting wheels...
Sorry, I'll just have to disagree. I have 2 mounted on a Prius, and a Corolla. It cannot be overtightened. The o-ring resistance is adequate to...
It's not possible to overtighten the aluminum filter housing. It only threads in a finite amount, then there is a physical stop (separate from the...
Apparently, you have never done battle with a plastic oil filter housing that was over torqued on by a dealer "tech". I had to use my corded 1/2...
