Separate names with a comma.
In this case, the "high" appears to mean a "high" logic level, not high temperature. It means the "circuit" level is high, or a short to B+ (+5V...
Is this the ipod interface only, or the USB/ipod interface (does it have a USB/Aux port inside the console, where the Aux port used to be?)
OK, as others have posted as well, the usual disclaimer applies: I’m not recommending this, just describing what I have done. Everyone’s skill and...
I bought this kit too - Before I decided to use the stalk switch, I thought about changing the color. It just has a standard incandescent bulb...
Thanks rachaelseven. The indicator is in the owners manual, page 186, but it does say "if equipped", so I suspect you're right, possibly a...
Hmm...that's going to be a tricky one to fix, if it can be fixed at all. It's in the wiring or communication between the display and the ECU....
One oddity - even though I'm using the factory circuits, the "fog light" indicator in the instrument display does not come on. Hawkmoon, does...
Well, I finished the Auto Headlight mod using factory circuits. It works great! :) I did need to remove the entire top of the dash to get to the...
Fantastic write up and photos!! Thanks, hawkmoon! OK, now here's the weird part. I was working on this today - I had not looked at your post. When...
As usual, fantastic write-up. Thanks, hawkmoon! This gauge is just fine (and then some, in the case of the 14 ga - but that's good, it will...
Hope not - especially with your great instructions and photos. thanks again for those!
Well, as I warned, haste makes waste. I've discovered a couple of errors, and determined that I need to use two separate 555 timers instead of one...
I just put one of these on mine. First, no soap/water solution. That's for plastic film applique. The hardest part I found (which really...
No, sorry, I think you cut the wrong wire. I wouldn't even hazard a guess which one... There is no change in resolution if you cut the right one -...
There hasn't been a posting yet for the part number of the Canada stalk, which has the "Auto" position. I will try to get that info from the...
OK, I threw this schematic together fairly quickly, and I haven't yet built it all, so please, nobody use it without understanding it and checking...
Fantastic detail, hawkmoon, thank you very much!!
Hi Rachael, In case you haven't seen my post, I figured out that the existing light sensor can be used for auto headlights, and the ECU has the...
OK, I have discovered something VERY cool. :D I had posted earlier that the light sensor wiring and ECU programming didn't appear to be present...
Thanks for sharing this, hawkmoon. A very similar circuit to what I'm playing with. A couple of comments and a question (warning: not for those...
