Separate names with a comma.
My dealer said he needed to order the pin from Japan. (Not sure exactly "how"). He said he had hundreds of the sleeves.
What you describe should be fine, with two caveats: 1. Using the Headlight +12V is fine as long as it only controls a relay coil, as you describe....
I installed a basic switch last night and mine responds the same as hawkmoon's - about 30 sec until lockout. You can cycle the switch as many...
Actually, yes, there are fuses in that junction box assembly - see Owners manual page 468. They are accessed from underneath the dash. Perhaps...
Hi tasogare, Well, I'll give it a try: First: Not sure why you list the WFR+/- on your post - those are speaker connections and are not...
That was what I forgot. Thank you!
I have looked all through the EWD's and I found absolutely no reference to a shift lever LED, light or lamp. There is one that is shown in the...
Rachaelseven, thanks much for posting this. My dealer was having a hard time finding this pin. I had decided not to download those connector pin...
Absolutely right, hawkmoon. The fog relay gets its 12V coil voltage switched from the tail light relay and fuse. See the attached page from the...
I don't know - without knowing exactly what the sensor is supposed to provide to the ECU, or what the aftermarket kit requires for a signal input...
If you don't have NAV, the new PT233-47100 kit won't work for you. If you have the PT545-00082 kit, I would go to the dealer's parts desk and...
I don't believe it is posted. (Copyright laws, etc.) I think you have the "old" ipod connector kit (PT545-00082), which I would return if i...
Tried this last night. There is a signal there, but not what it is supposed to look like, and when grounded, has no apparent effect on the...
Also, keep in mind the factory fog circuit is fused at 15A. if you use it, you either need to: - Install wiring that can handle 15A (16 gauge or...
Careful - The stalk lead does switch ground, but only to the ECU as an "input" (pin 27 of L7). The ECU then has an output (which is internal to...
Unfortuantely, even that won't get you past the firewall. I verified last night on my IV that the lead coming from the relay output (Pin 8 of...
Bluetooth "adapters" were made for some phones. They usually plugged into the data/charging port, but sometimes the headset port. Check with...
This hasn't happened to me in my Prius, but I have a Garmin nuvi 660 in another car, that picks up a false "incoming call" signal at exactly the...
Pretty close to what I was thinking of using - but I was considering using a 556 (dual timer) IC, one timer to provide the pulses and one as a...
The photo appears to be the one for Gen II (note the badging) - it is definitely different from the PriusChat store version (ribs are side-to-side...
