Separate names with a comma.
Contact Autel support? Either they tell you how to get those codes, they tell you that you cannot get those codes, or they don't answer. Two out...
The front and back ends of the pinch weld on the 2nd generation have a reinforced section specifically for accepting the car's scissor jack and...
I didn't notice that, but it has been a while since I used the scissor jack. The way the (old, but not recalled, Harbor Freight) jack stands...
For the front end, first drive the car up on a pair of 2x10x~16 boards, chock the back wheels, then use a 3 ton floor jack on the front jack...
That looks really nice. Garaged? It doesn't really prove anything though, because we don't have an equivalent car that was waxed. Even two data...
ONLY from an actual Toyota dealer's web site. Not from Amazon. Not from Ebay. Not from some random internet site. Install a low quality part...
B1421 just means the car was in the shade. It is literally what it says. "Solar sensor" == "is the car in the sun".
The bumper needs to be lifted up and shoved in so that the visible loops go over the sort of hook things that hold it in place. However... Pull...
There are a few small bolts that require a very low torque value. That includes the ones on the modules in the HV battery. For those use a 1/4"...
Much better that it be the 3 way control valve than the ABS system.
Yes, there were unambiguous about it. Unfortunately their statement is pretty equivalent to "don't wash your car with water", that is, it is so...
I would truly like to know how an inert substance like wax can damage a relatively robust and also inert material like clear coated polycarbonate....
The black dust doesn't mean the motor is bad. All electrical motors that use carbon brushes accumulate that stuff, and usually it just falls down...
Sometimes a good wash, and maybe a very light polishing, even by hand, is all that is needed to clean up headlights. Always try that before...
So it makes that noise when the car is stopped, right? That rules out all the parts which only rotate when the car is in motion. Does it make...
Ah, I see it now. Thanks.
Thanks for the diagram. Why the asymmetry on the end slopes? Are the 2x4's glued together, or just clamped by the threaded rods/washers/nuts?
Those are nice little wooden ramps behind the extension cords. I think I will make some. Maybe with one more 2x4 for a little more width. How...
If the blower makes odd noises and sometimes doesn't run then it is almost certainly going to be at the blower. (Electrical problems to it are...
Since the frequency of the noise goes up with the blower speed it will either be a problem with the blower itself, something rubbing on it, or...
