Separate names with a comma.
If you mess with the brake fluid you'll have to take it to the dealer and get it adjusted you will have no brakes Posted via the PriusChat mobile...
You have to un hook it unhook it to get the 12v battery to charge why you just have too or it will never charge but mostly battery old and bad...
Is the battery charging then .
Not in order of mpg just in general [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] And for looks [ATTACH] [ATTACH] i'll add to this...
Had the eith both hid and non hid Hid was the center oin was shorter then oem sanded black off the plug and pull it down a little so it touches...
[ATTACH] easy fix .
[ATTACH] Easiest way is with a prybar to break them free that the hardest part Jack up one side [ATTACH] remove top one and have your low profile...
End of strut Springs in the wrong you finger to find the end there a notch on the bottom side the end spring sit in to fix it take apart strut...
No back light or it move out the it holder .
I had this happen and clean and lube the throttle body flap with a copper brush holding open with the spring on the side and you should be able...
[ATTACH][ATTACH] A must have 3 bolt 2 spark plug wire end unplug and 2 bold on relay box lift up cover 10 min job Posted via the PriusChat...
Try turning car on and pulling these 4 fuse [ATTACH] The turn the car maybe the computer are out of sync like when the all the screen go blank...
To remove tie rod from shock both the front tire need to be off the ground and a open end lunch and Allen socket Allen socket holds the bolt...
There three place coolent goes most likely the one under the black cover attached to the radiator and one just next to it 2 " And the one on top...
I had HID blubs the center pin was shorter they flash when bumpped then shut off had to turn on then off to get them to work bunch of off things...
Then find the 12v to the High voltage HID and hook it to 12v blub then find the 12v for the high bean hook it to the blub ground the last pin to...
[ATTACH] this is HID .
Is there a silver connector Shield on your connector that covers the plug those are HID if you just have a standard connection your halogen...
It does calibrate everything over again. .
So it working or not .
