Separate names with a comma.
Here's the Hybrid-Control Output from the latest start attempt
Got my grid charger yesterday, and got Hybrid battery charged up. Attempted starting vehicle, and same failure, and symptom of whining MG...
Before I go any further, I've ordered a Prolong Grid Charger to attempt to get my Hybrid battery in order. Can anyone point to a process for...
Ahh, needed an experienced set of eyes on that data.... Right under my nose. Now, next question is to charge it? Would one of those grid chargers...
Thanks Travis. My question now is: What torque and RPMs are needed from MG1 to start the ICE? I'm wondering if my Hybrid battery strength is...
Well, does anyone know how to determine what Techstream may post for Transaxle / MG failures / problems? I don't see anything obvious in the data...
I had recorded the start attempt and reviewing the Techstream Engine -ECU data, looks like the MG1 rotates to 3900 RPM, that noise in the video,...
I've rotated the ICE off the lower pulley, spins normally
I posted a snapshot of Techstream data that shows Hybrid battery cell statuses... They are certainly lower than when I measured them over a week...
Posted a video of the sound it makes when attempting to start on Youtube. [MEDIA]
I ran a first attempt of Techstream, not sure about recording attempt to start but captured static data this morning. Clicked the 'snowflake' and...
Well, if I wasn't overwhelmed before, I sure am now. Just puled reports for Hybrid Control and Engine / ECU .... Too much for me to digest right...
I apologize for my random postings. I'm new to Priuschat also. In order to respond to a particular post, do I select reply within that post, and...
I'm newby to techstream, so not sure what you mean by freeze frame of the code. If theres addtl info attached to the P0A0F code, not sure how...
Got the MVCI to work with Toyota Techstream, Hybrid System Code pulled is P0A0F - Engine Failed to Start . Many things to check such as MAF,...
Well, I had to replace the ICE about 12000 miles ago, so, already swapped the one from my old engine to no avail. Don't think that both of them...
While not being able to get the MVCI to work, in the meantime, got a Kobra ELM327 and Android Torque App. Don't think it will do Hybrid Diags, it...
Yes, can see it, repaired January 2016.... do not know if that means the software repair, or IPM replaced.....
Here's my VIN JTDKN3DU8B0289978 2011 Toyota Prius
