Separate names with a comma.
After replacing the reservoir and the o ring I appear to be back on the road. Thanks again for the help.
Is it safe to say that the inverter coolant reservoir is the highest place in that system? The fact that the coolant only leaks when filled to...
To be clear, the inverter reservoir shows a little below the low fluid mark, no leakage, stable for days, drives fine for short drives... Then I...
One more problem. After this work was done and my car runs again and I did the final inverter coolant fill and bleed everything seems fine. I...
Success!! I purchased a used inverter for around $250 that had some very mild assurances that it would work. I also purchased a used HV ECU...
Ok, cool Thanks for walking me through that. In light of this here's what Im thinking. From the troubleshooting I was able to accomplish the...
But if i have a yes at that point then can someone look this up for me: Go to DTC Chart (See page 05-440). Find a page number to proceed to its...
Yeah, that's what I thought too. (BTW, I cut the page down to 2 pages for this example, and I do have the rest of it.)
Sorry, here's the file:
Can I get an opinion on this complicated question? I have error code P0A94 with subcode 555. Im going to attach the troubleshooting guide that...
Does anyone have any experience in successfully conducting an active test using a knock off version of techstream? Perhaps I should pay the $65...
It seems like others have had trouble doing active tests in Techstream. Can anyone guide me to a better version, or some further info on this?
Im using windows xp, 32 bit and TS version 15. Is there a better version that might be more functional?
Through pure luck and trying this too many times I was able to get the car on, with dash lights and a decent battery charge and I still cannot get...
do i need to update the version of techstream I am using?
I've charged this more and Im not getting anywhere. I have the issue where the dashboard lights occasionally don't turn on. Apparently there...
I tested the fusible link in the fuse box with an ohmmeter. From under the red plastic cover to the bolt closer to the front of the car. So...
I did put a new 12v battery in. The car does not drive and does not go into ready, whether the 12v battery was charged or not. What would I...
I've got a battery tender and I charged it up, but I keep having it die in the middle of testing. I'm going to try again later and hopefully I...
I found some advice on this from another thread, so no need to follow up on it. I'll be looking for a battery tender under 4amps.
