Separate names with a comma.
Glad to be able to help and this site is great for info about Prius. I wish I had known about this site before I bought the car. With the good...
Not normal. Should be 5 ~ 6 bars. Not normal. Should have ~ 1 minute stage one warm up even if the engine is hot. That explains it. Good move to...
I think the "Low" level is at least at the top of the arrow if not higher, and seems way too close to the "Full" level. Again the thick seams...
There is a Full mark right above the thick seams and a Low mark right below. Why Toyota put those obtrusive seams there to block the view of the...
I am amazed the dealer won't just top up the fluid to make the customer happy. I went to the dealer to top up the engine coolant twice, after they...
Both good questions! In order to show the total power, the colored bars "float" on top of the cumulative power from left to right. So the MG1...
Yes they are KWs and the color scheme is the same as the original PSD RPM gauge (cyan=MG1, red=ICE, yellow=MG2). The three colored bars are the...
Well, after 2 and half years of daily use, the EBH on my car decided to quit working. A quick check with a multimeter found it open circuit. I had...
You need a C++ compiler for your Mac. Try google for it. I found this thread: Need basic C++ compiler/ide for mac. Any - C++ Forum and this:...
OK here is a place to start research: scangauge x-gauge for dummies | PriusChat
I haven't paid much attention to the block voltages but I just plotted up the log from a recent trip and didn't see the abnormal value.
This thread may help: Water leak...into spare tire area etc | PriusChat Check the hatch door frame for cracks and check the antenna base on...
It should be doable with the new ScanGauge. Sorry I don't have a link for you but you should be able to do a search and find it. Good luck!
If you want to look up or buy parts then call the dealer and ask for the parts department, not the service department. Good luck!
It's getting off topic but this reminded me that I used to be puzzled by the "AUDIO OUT" and "AUDIO IN" terminals on the back of my cassette deck...
I am not handling the acknowledgement myself but looking at the log I see that OBDLink is sending 7E3 30 00 00 00 00 00 00 00 not 7E3 30 7 .......
Congrats! I heard some DTCs need several power cycles to clear. I wonder if this is the reason why it took a while for the warning lights to go...
Where is it exactly? Do I look for it above the hood or under the car? When I opened the transaxle fill plug I did not hear any vacuum suction...
Don't forget iOS and Android. :)
Man you worry too much! I think the tech just showed you the fill plug by mistake. Since you checked the drain plug being correct (having hex...
