Separate names with a comma.
They use Sil-Glyde in the Nutz About Boltz video, so I picked up a large tube of that. The important thing is that you don't use a petroleum...
I've heard that Berryman's B12 piston soak is a good way to to free up piston rings that are stuck with carbon deposits. You did dump and replace...
That's not your hubcap rim, that is the rim. Is the wheel/tire holding air? That's your first clue whether any permanent damage is done. If the...
Fumoto valves are very convenient and easy to to use for less mess. However, the fact that the valve remains screwed up into the oil pan means...
We all know that everyone who shouldn't be driving, isn't driving. Right? [emoji849][emoji12][emoji6] .
The car in your avatar picture is a dark color. As an owner of a 2011 winter gray metallic Prius, there have been many times when other drivers...
HID bulbs also require ballasts. One on each side for each bulb. LED bubs are often much larger around the base of the bulb due to heat...
The hatch struts would also be way too strong for the light aluminum hood. The hatch is a much heavier steel assembly, and thus requires struts...
Anti seize (messy aluminum stuff) or some silicone grease/Sil-Glyde safe for rubber boots and seals? I believe anti seize is petroleum based and...
I have a 2011, so the foglight position is different, but basically you need to raise the front end (ramps or jackstands) and remove the...
I put a rubber stopper in one end, then fill it with straight, heavy duty liquid drain cleaner, same basic (pun intended) ingredient as oven...
Picture please. .
Agreed, I've got many zipties under the hood. [emoji41] .
Umm, I think you mean ducktail/duck tail spoiler? The bill is on the other end of the animal. [emoji6] .
Those wheels don't look oem because they have dual bolt patterns. Most likely 5x100 and 5x114.3mm. Short answer is, if it came off a 5 lug...
Gen 2 and Gen 3 have the same 5x100 bolt pattern. Are you confusing the Prius v which has a 5x114.3mm bolt pattern? Posted via the PriusChat...
Whatever it is, it seems to be capped off with rubber plugs and not male or female terminals. I doubt that it plugs into anything. Probably used...
Look for oem LED headlights. .
I vote for the mesh, the stars look heavy. Coming off a Forrester, they probably are on the heavy side. I put old school Subaru Imprezza STI...
Been there, done that... it's easy to forget to tighten all of the many bolts down, many in out of the way, difficult to see or get to locations....
