Separate names with a comma.
The temperature sensitivity strongly suggests a failed or failing inverter pump. You want to get that fixed before it gets so bad it blows a...
The gas is also a year old. If you are lucky and the tank is nearly empty then you can add a couple of gallons of fresh gas and it should be...
Does "suddenly rolled all the way down" mean it went down at the normal rate or that it fell into the door? If the latter there is probably a...
Copper sulfate is also blue, although usually a little lighter than the blue in the OP's picture. There might be sulfur in the atmosphere in that...
Use an OEM pump if you replace the inverter pump. It is said that Aisin makes that pump, so if price is a major constraint, perhaps consider the...
There are a million techniques to quickly make headlights clear. There are a handful of ways that keep them clear for a small number of years....
correct nope. When checking for an open circuit between pins A and C the resistance between A and C are measured. Because the resistance from...
That sounds promising. At this point you need to figure out exactly where that ECU is so that you can aim directly at it. The ECU will have a...
No, it is no conductance, the exact opposite. Think about it - if there is no path for current to flow between the two probes then the measured...
I had to order positaps from Amazon or Ebay, don't recall which. Possibly fakes, but they work. None of the local car parts stores had any....
Or use a cheap DMM (Harbor Freight sells one for $7, sometimes less) set in voltmeter mode and tapped into the questionable 12V wire. That way...
OL on meters means "out of range". That is, the value is too large to measure. In this case that means the resistance to ground is huge, as it...
If PPOS is not just point A to point C then all of those other connectors must be released before the "check for short" will be a valid test....
This is resistance measured at the pin on the cable to ground, with the cable unplugged at both ends? Because it doesn't really make sense that...
You should be able to find an inline fuse holder at an auto parts store. If you are going to put 12V straight to that pin on the TCU then the...
Have you read through this thread? "There is a problem with the Transmission P Lock mechanism" when road is wet | PriusChat It has...
Toyota used a 3 phase motor for that??? I had assumed the car just used a solenoid and a spring, or something simple like that, to...
Where is this vehicle located? In humid locations there is a tendency for corrosion to form inside the HV battery ECU at the big connector. If...
Does the dashboard light up normally? If so perhaps you can get error codes? I'm beginning to sound like a broken record, but if the 12V is...
It is probably a real problem (my money is on the rebuilt battery), but just in case it was a one time glitch, the son could unplug the two...
