Separate names with a comma.
Which computer(s)? I want to take all the components that i need to start a salvage car to the salvage yard and change them out in place so that...
What components do i need to switch over from an operable gen 2 into a scrap, was running at wreck, gen 2 in order to get it started or get...
Running w/scissors
Ive got a new to me '10 and im running dr. Prius to see what the battery is doing...i know it has issues and im going to change some modules. I...
Super... Thanks... I've been putting off getting set up with register an because I have an older laptop that I believe will not run it...however,...
I'm anxious to try the new double bearing Dorman replacement. I've been through 2 $35 aftermarket and 2 unknowns that I pulled from wrecks... I'm...
Finally... What more do I need to say! I'm currently using a spare heater pump...but I'll be getting one of these soon. In the mean time, anybody...
Has anyone found the best retrofit replacement auxilery/inverter cooling system 12v water pump? I'm determined to find an upgrade for the stock...
I'm wondering whether it might be done by switching out a matched fob and reader receptacle. Where is the code stored? Posted via the PriusChat...
Is there a way to read the odometer on a junk yard prius? .
It was well past time for tyres. I have always preferred good used tyres over the extra cost of being able to say "I got new..."anything,...
I ran across this statement in some random corner of the interweb... "...message is a stuck coolant flow control valve. This problems is more...
I'll sometimes coast in neutral downhill or for an 1/8 mile to a stop sign(you know, bump up a .1mpg...). Invariably if I do this I get a smell...
Yep...replace the bad cells and keep on rockin' or sell it cheep to me...after all, it needs a new battery, and that costs more than the car is...
Why not replace the 3-4 bad cells? .
It is fairly new coolant, so no... i lost very little and added less than a half pint to fill it. Ive noticed what your referring to... Just a...
So I had got a code for inverter temperature out of range. I thought that the cooling pump had gone out, and in fact it did. I replaced it and all...
First: can someone say what the normal temp range for the HV converter is? 2nd: so far I don't get an error at 190f, seem ok?
