Separate names with a comma.
Not always a good idea. Most people in my experience break the key off in the lock compounding their problems.
Ok, just for the record, WD40 is not a lubricant, it is a solvent. On its own it is not good for your locks. You should spray a light oil...
Some notes and experiences on my install for those interested. I installed an ID-4100a dual band radio and a Kenwood TH-F6a hand held radio for...
I bought a package of refill strips from Home Depot. It comes with small, medium and large. I used two of the large ones.
Rick VA7RX. Installed an Icom ID-4100a with a custom L bracket under the shifter. Attached with 3M command fasteners. No holes in the dash, and...
Iphone 7+ with QI charging adapter works well with the Prius QI charging plate too. I have a Magpul case over top of it.
Nobody answering this question?
How did you mount the control head? Any pictures? This is my next project.
My last day at sea on the Star Princess! I found a safe deposit box keyblank that was the correct thickness and larger than I needed. I cut it...
Curious, was it ok prior to the replacement? I'm thinking you could avoid the problem by jumpering another battery to maintain power during the swap?
So, what did I do wrong in posting the picture?
Ok, first day of my 2 week vacation and I go to work! Had to pick up an expense cheque, so it was worth it. I took my manufactured keyblank...
No pictures showed up. I still don't know what dashcam you have. Sorry to be a pain.
You didn't provide a picture or model number. What dashcam do you have?
Well, I didn't get there! I have a week at work and then I'm off on vacation for 2. It isn't looking promising at the moment.
Made a key blank today. Haven’t cut it because the machine I want to use is in one of our other shops. Maybe this weekend.
Normally "laser" cut keys are cut on both sides. The fob key is single sided. I suspect this would cause a problem for some machines, and blanks...
When you need to go uphill, you do it in reverse. That way your actually going downhill.
My first post! We can cut them in my shop. Not sure about the key blanks though as it is only cut on one side and therefore fairly thin.
