Separate names with a comma.
Yeah, Kenmore is I think now part of LG. Not that "Kenmore" ever made anything itself, it was usually just rebadged Whirlpool or some other major...
How is a drain and refill not a flush? Was it only the tank, leaving all the old fluid in the lines? I think it might be beneficial to put new...
I think there must be something a little funky about the inverter coolant loop which led Toyota to put the bleed valve where they did. If it...
To reduce wear on the electric door lock mechanisms I would set it for just the driver's door. Cheaper to replace a fob if the button wears out...
I bled mine. Run a bit of tubing from a valve at part of the loop into the open container next to the inverter. It takes a couple of minutes...
That might be true, but we had two GE microwaves (of different sizes) fail in about a year each with bad control boards. I don't recall any...
I wonder if that might happen if the loop wasn't bled properly. Bubbles that get into the tank will rise to the top, burst, and could send a...
Is the SKS button in the out position? Won't start without key | PriusChat
12.3V should have been more than enough to start the car, assuming the voltage doesn't collapse when a load is applied. You might start by...
Unless the dealer cited an actual fault in the pack you should assume that they are trying to fleece you. Having just replaced a pack it is hard...
If the OP is willing to do the work and has some common car repair tools and a place to do the work then buying an OEM pump from a local dealer...
A test I ran on our old NiMH pack showed that it had increased in capacity by about that much over a period of several months with no processing...
This might help on the software end: How-To: TechStream In 5 Minutes | IH8MUD Forum
Agreed. There are many such dealers in SoCal and the amount of price variation can be significant. I have seen posts claiming that Aisin makes...
Pennywise and pound foolish. It isn't hard to change this pump, but it is inconvenient to have one fail, and inconvenient to have to replace it....
The MAF sensor on this car is ridiculously easy to replace, there is no way I would pay somebody to do that. But before replacing it I would try...
The last few weeks I had noticed that once and a while the steering wheel made a sort of clunk, usually when the car started moving while turning...
Glad things turned out well. Now you can change the noisy one out at your convenience.
Yes, diagrams only after you have already found the part. This particular part can be looked up by name or part number. That isn't generally...
I google'd for pictures of the air intake hose, and the hose immediately downstream from the air filter does have a bellows section. That would...
