Separate names with a comma.
The spec was: AMD Turion dual-core 2Ghz 2Gb Ram(it has 2x1Gb and i remember one was 667Mhz and the other 800Mhz) I has installed Windows 7 64bit...
Exactly same issue i has, on a Lexus GS450h, all ECU's was readable except the hybrid control ECU, when i tried to connect to it always it said...
But during the first few cycles with holes open to heat up the modules that may also will boil off some of water and then it will have even less...
I thought today about what Brad told that if to inject to much then there will be less space and the valve will open quicker, then if it will open...
Yeah i'm almost ready :), now waiting only for mini electric drill and a plug tap 1.6mm tool to cut a thread for 1.6mm screw Got about 470grams of...
Interesting info Brad But 9ml per module (1.5ml per cell), that very small amount and it will just wet the plates, then maybe it will dry again...
I'm also confused, after re-reading later noticed that he says "I used two holes similar to what John did to fill the modules full." :) Alex.
About module blown off this reminded me i seen same happened on Russian Lexus forum, finally found that message again, the guy showing his module...
Hi Roy I remember on my car after a disconnect of the 12v battery the techstream always shows 0.019 ohms on all pair modules after some driving...
-
Probably you have set on safety timer in settings? the link below it's manual for your charger. http://hitecrcd.com/files/X4-80Manual.pdf...
I have a different charger(SkyRC quattro B6AC) but some settings are similar, on my charger is impossible to turn-off the delta peak but it have...
Hello You have that low numbers of charge input probably because the delta peak setting stop's the charge and ignore your 7250mAh cut-off...
I remember when i charged/discharged all my modules to measure the capacity, the last one was about 4Ah i inputed charge to it over 9Ah(like in...
Maybe even easier and faster will be if you cut the needle and make it length 10mm, so it will never touch the plates and you will not have to...
Roy, if you going to do 6 holes then i think better way is like John(Britprius) said in other thread: "My intention is also to fill the cell and...
So that's mean the method how to fill from 1st post will not cover the top of plates and need search for another method right? Then maybe will...
