Separate names with a comma.
41 lbs. :eek: The stockers are 28 lbs. My setup weighs in at 24 lbs.
Yeah, but I leave the rear wheel on the bike :cool:
:cool:
Here's a wiring diagram of my simplified installation.
After you expose the turn/headlamp switch you'll see a blue wire in the number 1 position from the left. That's the wire you need to connect the...
Get a digital gauge and check them every month :cool:
I didn't mount the on/off switch. I let it hang off the wire harness so I can access it from under the dash. I didn't use the control modules...
I took advantage of the central location and mounted the photo cell next to the Toyota A/C load sensor. It was easy to run the wire into the dash....
So,! After having my cluster out to perform the passenger air bag light modifications, I decided to mount my DEI model 545T Auto Headlamp Control...
Just what the title says. This is how I did it :eek: I don't do things the same way others do and this installation is a minimalist approach to MY...
Why ? :eek:
Just open the UBEC and look on the inside of the cover. It's marked with each fuse and relay.
Those look heavy :eek:
I did all my bulbs last week. The interior is much brighter. Now I need to find a good LED for the turn signals.
This fits in the back of mine with the front wheel removed :cool:
Don't use the cruise control on hills.
The digital will be the best and most accurate choice. Stop using 3 different gauges and stick with the digital.
Open the trunk and charge your 12 Volt chassis battery. You could also disengage the traction battery switch to shut the system down while the 12...
My 08 ran out of fuel on the freeway twice. Both times I was able to use the EV to get me into the station. The first time it happened, I pulled...
Toyota has a TSB for the 2012 C. It's a replacement glove box door. TSB#0076-13 : Glove Compartment Rattle over Rough Roads (June 4th 2013)...
