Separate names with a comma.
EDIT - new answer after seeing the bolt. Something to try - Sometimes (very rarely though) on suspension parts, like maybe that one there, they...
I just got emailed a 10% off code for batterymart.com "Take 10% Off Your Next Order Use Priority Code SAVE10. Expires 11/8/19" I previously got...
Some comments to go with all the other advice so far ... If you don't want to climb inside to do the hatch release, you could power the car via...
10k is how I read it. 5k since the last change. 5k until the next one. And I believe 10k is the OCI the dealer will do, even when you take it in...
Please don't take this wrong, but the common thread with all the faults seens to be the repair process. Summarizing your report, to make this...
It sounds like your tool is not very good, or not good enough. Skipping on the filter at this point may be your best option, and should be fine...
camshaft bearing cap? I'm not sure what part you mean, but that is the name of the part that goes over the top of a single camshaft, with a bolt...
All good info above - thanks. I did this today on my 2012 v with ~54k miles. Turns out for me it was not worth doing. There was hardly any dust...
I really like the use of office floor mats in this application. I thought I was smart in using the 2'-square interlocking foam pads scattered...
Very interesting video. Thanks! You mention the importance of humidity a lot, early on. Can you explain how that factors in, based on physics? I...
Excellent. That's what's most important. Good luck.
Careful what you read on the interwebs. I'm pretty sure Gen3 is model year (MY) 2010-2015. They surely started manufacturing 2010 MY cars in...
This is a completely non-critical part (some would even say optional). I'm impressed that you wore out the originals. I'd get one level up from...
Nice. So is your plan to rotate those two EGR coolers at 50k mile intervals or whatever? So you always have a clean one ready to pop in? Really...
If on a 2012 Prius v, I were to disconnect the 12V battery and do a regular brake fluid flush / bleed following procedures developed before I was...
Wow, sorry to hear about that at such low mileage. I'm new to this, with a 2012 with about 55k miles, seems to be running fine. Thought I'd be...
Well, if you later see your filter for sale on Craigslist, you'll know where it came from.
Not sure what that has to do with the torquing procedure I discussed. If you're suggesting that by the time you get to the head bolts to do this...
The spec for the head bolts tightening is 49 Nm, followed by 90*, followed by 45*. All that of course in a specific sequence on all 10 bolts,...
I don't know if buying at an actual store guarantees genuine plugs. I saw somewhere on a forum I read recently where plugs bought from the DEALER...
