Separate names with a comma.
I was able to remove the unit B and confirmed the unit B was good. I removed the connector and confirmed high resistance between pin 1 (3I) and...
Thank you, I will try. Like you indicated, it may not have enough slack to allow removal
I was thinking pin 31 was at the am2 fuse block?
I measured the voltage at pin 10, 6 volts with ig off. With ignition on the pin 10 volts is 6 and pin 11 out is 6 volts. When ig off the pin 11 is...
I have found the inverter cooling pump relay terminals and confirmed the relay solenoid is functional and the contacts close when IG-ON. I checked...
I cannot see the harness connections without disassembly at the fuse box under the hood. The connector to the pump was in good condition. When I...
Locating the wiring issue is going to be difficult, the pump wire goes into the fuse box harness under the hood. Note: the pump white / black...
I went to the library and used the ALLDATA repair reference material, it has circuit diagrams and troubleshooting. This manual troubleshooting...
It appears the inverter pump relay is in the fuse box connector block under the drives side dash. I have been told this is in the “inner circuit”...
I removed the headlight since I was expecting to need to replace the pump; the posts all indicate that the pump is the most likely cause. Before...
I recently received a P0A93 and VSC code. I noticed a sudden loos of power, likely the vsc. I was close to home, so just continued. The car...
