Separate names with a comma.
What is the odometer at? Our Gen3 hatchback front sway bar end link bushings were worn through at nearly 130K. As far as using a spring...
Yes, H11 lowbeam and 9005 highbeam. SM-G781V ?
Here's an example of the type of capacitor based anti flicker modules I used to get rid of the flickering when using LED bulbs in high beam DRLs....
That's because Toyota uses PWM (Pulse Width Modulation) to dim the high beam bulbs in DRL function. In this graph, you can see where the pulsing...
Sounds like this Fram Sure Drain, that I had before switching to Fumoto. Note, disregard the incompatible thread size on this ebay listing. Posted...
And what Mendel was saying was that there's still oil in the actual intakes on the head, so the intake manifold isn't catching as much as it...
I hope you put the clothes hanger through first, then did all the cleaning and pressure washing. You want to open the passages up before the...
I believe Mendel mixes his oxiclean mixture using near boiling hot water to help it's cleaning effectiveness. SM-G781V ?
The OP has a pressure washer, which I did not. Maybe only one good soak with drain cleaner or Oxy Clean will do, followed by rinsing out as...
Then, after letting the drain cleaner soak in the plugged EGR cooler, pour it out down the drain running copious amounts of water. Then leave the...
Regarding the last picture of the cooler. No, that is not good enough. It should be very clean with all visible channels clear. ...
If lye/sodium hydroxide/oven cleaner is used, follow up rinses should be made using very hot, near boiling water. The sodium hydroxide and hot...
Not really, my wife drives our 2011 Gen3 very gently. This is what the EGR cooler looked like at 120Kish miles. But, as you can see, the flange...
That EGR cooler is nasty, definitely due for cleaning. It should be gleaming stainless steel when it's nice and clean. I don't remember my EGR...
I found having long hose pliers really helped getting those difficult to get at hoses off. Clearance around the hoses and clamps are so tight it...
I never paid attention whether there was a correct orientation to the gasket. I was more concerned about not dropping it while installing it back...
Yes, the intakes look nasty. For sure you have to clean the small egr passages at the bottom of the each intake opening on the intake manifold. I...
It's called selective hearing lol. SM-G781V ?
They should also have some bead sealing goop available if the rim is truly in rough condition, even after giving it a bit of scouring with a...
I believe you need a 10mm hex socket, not a torx for the drain and fill bolts. SM-G781V ?
