Separate names with a comma.
I had the same puzzlement last week and temperature change was the only variable I could reasonable account for. Since it had been 4 to 6 hours...
I had this last night. I held a constant pressure on the EGR valve black cap towards the rear of the car and that gave me the slack to thread...
Measuring Cylinder Head Temperature directly would probably yield the necessary data to at least make a guess on how widely the temperature does...
Does the engine turn over by manually turning it over at the crankshaft? ie any chance that it’s seized? Just looking at the big picture of the...
Pay for a Used Oil Analysis and get the data needed to objectively answer your question. You might be surprised with the results or it might...
On the ECU, forward side, above the orange connector, there is a white connector that doesn’t look pushed into the ECU all the way. I could be...
A GoPro set to 1 minute time lapse - I hope you weren’t thinking it was something fancy :) Maybe I’ll get a proper data-logger from Santa this...
I just completed my first full reconditioning on my 2010 that was showing no signs of failure or codes. Unfortunately, my data collection plan...
Coolant pump over revolution: When the pump impeller shears from the drive shaft, the pump motor is now unloaded and goes into free spin at high...
A soak or two of 30-40% mixture of Super Clean or Purple Power equivalent and water takes it to the next level clean after the Oxi soaks stop...
Techstream does have a test that allows you to take control of EGR and manually set the step. This is done through Engine and ECT - Active Test....
So my valve stays closed so no problem keeping cleaning solutions inside. I put a mild Oxi solution with hot water in there and let it sit for...
That carbon coking will foul the movement of the valve pintle between the inner chamber and where it exits the top. I’m not sure what is in here...
Keep this side clean and free of water or cleaner. There is some type of grease on the thread of the magnet, not sure what kind. That spring is...
[ATTACH] iPhone ?
The valve is spring loaded closed. The black cap can be removed, the magnet removed and the inside chamber can be cleaned. I would not let...
For sure you’re not capturing all you can. My Mishimoto Compact Baffled can (3 oz) must be emptied every couple of weeks minimum if I’m driving a...
Thanks. I was curious if the corrosion was actually reduced or moved somewhere else. iPhone ?
For the set I got on Amazon, I used #3 and #6 for the EGR. They also came in very handy for cleaning the Intake Manifold when I filled the thing...
Ah yes. I think the rings/pistons were more for the oil consumption issue. iPhone ?
