Separate names with a comma.
The dealer tried that same move on me when I used to go there for service. My filter was marked with a date in red marker, they brought me one...
I have the same Mishimoto can. The top mount cover is a little flimsy and I’m considering a better mounting solution. With the orientation of the...
Head gasket. Coolant tank is empty.
I had previously thought the M1 was good, but now... A lot of reading of others’ opinions on oil is very subjective. I read elsewhere the no-go...
Never tried it but looking at the AMSOIL Signature Series 0w20. Anyone have any issues using it or get a funky UOA with it? The specs look...
I used this successfully: https://www.amazon.com/gp/aw/d/B0007PHD0S/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8
Those bits work just like in the situation in that video - bolt freshly over-torqued. If you’re dealing with something that is seized on due to...
Had this happen. I used multiple sprays of penetrating oil and let it sit for a day. Next day I used a hammer and chisel on the edges of the bolt...
It does matter. Use an electric tester or fuse tester to find which side is hot. Your wire goes on the opposite side to that, otherwise you have...
Lubegard 96030 Kool-It Evaporator and Heater Foam Cleaner [MEDIA] [ATTACH]
It’s also working in my 2010 Tech (Canada) but it keeps telling me that the 401 is closed and trying to divert me onto side roads when there is no...
[ATTACH] I’ve used this for a while. Need to get the previous gunk out of the shafts first.
I’ve been running a Lukas dual camera system for a couple of years that meets your specs. What I’ve learned in the pre-purchase phase was to...
Spacecoastbill is using this, I think: https://www.amazon.com/gp/aw/s/ref=is_s?k=b00uuqd9l6 https://www.amazon.com/gp/aw/s/ref=is_s?k=b00uuqd9l6...
Did this same job once on a 2000 Corolla - looks to be about the same procedure. The passenger side (North America) came out easy. For the...
The modules not under charge seemed to be staying around ambient temperature here at 25C but I'll space them out more for the next batch. I'm all...
Thanks JeffD. I didn't want to cook the modules but had read that 1C was ok with enough cooling. I am cycling every other module as you...
Any issues charging at 5A using Hitec X4 AC+ and a good cooling fan running into the stock plenum at the bottom of the pack? The rest of my...
Had same problem. Followed wires back to drivers door where main box is and I found a broken connector wire on the back of the plastic connector....
For those with ScanGauge, I have found the best charge rate occurs around -30 Amps on the BtA setting using light to moderate braking. Anything...
