Separate names with a comma.
I am so excited to share this latest edition of PriiDash that displays right on the MFD. Here is a picture: [IMG] It involves some hacking into...
More old data shared by usbseawolf2000: [IMG] [IMG] [IMG] [IMG] [IMG] The data is more sparse and may contain unwanted delay/mix-ups...
Here are some old data from my car: [IMG] [IMG] [IMG] [IMG] [IMG]
Well I found the previous graphs are actually scattered in different threads and, worse yet, some of them are buried deep inside multi-page...
The drive data logged by PriiDash includes the HV battery current, and the voltages and resistances of individual modules. We can use the data to...
Please take a look at the instruction here: PriiDash(TM) - Enhanced Instrument Panel and Data Logger for the Prius and more The most...
Thanks for sharing the data. After graphing, if you don't mind, I will post in the same thread where all the other graphs are (I hope I can find it).
Thank you for the detailed info and suggestions. I will add to the to-do list but may take a long while to do them. (It's open source so feel free...
Take a look here: OBD-II PIDs - Wikipedia, the free encyclopedia for generic PID info, and here: Prius PHEV TechInfo - EAA-PHEV for Toyota PID...
I tested a Bluetooth device before: that worked fine. I haven't tried Wifi. The main issue with your 2013 Prius is that it needs a different set...
Hi you are right that sounds like baud rate issue. The PriiDash program actually does not set the baud rate of the OBD-USB device. You need to use...
Thank you! :)
Thank you for the quick reply! :)
Are 29/30 for power and 27/28 for video signal? or the other way around? Thanks!
Now that you made it work, could you clarify the pins 27 ~ 30 which ones are video signal and which ones are power to the camera? Thanks!
Presumably this was after the warranty ran out?
Looks OK at this scale. To be sure you can plot the difference between each module and the average V (at each moment) and see if there is any...
Any updates?
I am not sure either but you may try running the cmd.exe as administrator, then run PriiDash from command line. Another thought is to set the...
Great! Let me know if you have any other questions when the cable arrives.
