Separate names with a comma.
thanks for your thread, I am about to replace my engine but unsure about whether to pull it out of the top or the bottom. It sounds like if I...
thanks that seems like an easy way to do it, I have never removed an axle before. how is it secured into the transaxle besides the big nut on the...
its a tent trailer that someone repurposed into a utility trailer by putting plywood on the frame.
I'm going to pick up a used engine from a local junkyard this week and was wondering how heavy roughly the engine is? Is it something that a...
Well I have been regularly towing between 800-1500lbs for the last 60k on my Prius and the head gasket is starting to leak at 275k. The car still...
do you mean you did it without an engine hoist? how did you lift the replacement engine off the ground?
I'm in Alberta so we don't get very many days about 0C unfortunately. I run the torque app on my phone and even with the grilles completely sealed...
I have a pretty short commute to work and back, only about 3 miles. I have a block heater that I turn on 2 hours before my commute and I also have...
no, I've never towed a U haul trailer before but most trailers have their tongues around the same height and if you simply eyeball how low the...
business as usual, consider a block heater or stick on oil pan heater for convenience. Vehicles parked outdoors in the winter tend to rust less...
not a terrible deal but definitely budget for some maintenance items such as new shocks/struts, plugs, possibly brakes, etc. I bought my Prius...
I bought the highest rise I could find on amazon, its something like 6". I have the Uhaul hitch which sits really low. Those Uhaul trailers are...
I just sold my factory cat after replacing it with a cheap eBay one. I couldn't believe that I was about to get $400 for it. No wonder people are...
Ok I sourced a junkyard motor, and plan to take it out through the top. Did you guys have to disconnect the exhaust manifold to have clearance to...
kind of ridiculous because do you think the transmission, motor, and brake system are as well sealed as a bottle? They all have vents and...
Hi all I'm also getting ready to do a swap. I wanted to see if any specific tools required besides pry bars and an engine hoist?
I have a good 8" bar in my upper grille, I cut away a part of the plastic for it to fit. You want to have the LED bar at headlight level, too low...
I noticed on my last drive that the brakes were not releasing well when pulling away from a stop, I could feel the pads sticking and clunking when...
if you live in California it will be tough to get an aftermarket cat to pass. in that case my recommendation is to drive it normally until before...
The code doesn't affect anything unless you have to pass emissions. If that's the case you can go buy a cheap catalytic converter on eBay and have...
