Separate names with a comma.
It is likely the SIGNED() function is not working. If that is the case, try this: NameShortNameModeAndPIDEquationMin ValueMax ValueUnitsHeader...
Hi Cave Arnold, I've checked your raw values, they do seem to flip between the min and max. I 've a log file captured by Techstream on a Gen3:...
The battery amps in crabbyman's case actually increased from 135.9A to 148.1A, different from yours. So does it mean the update does not necessary...
Hi xliderider, Actually it is from low voltage of traction battery to higher voltage of electric motors. The traction battery norminal voltage...
That is incorrect. There is actually only 1 fixed ratio. Unlike conventional car, the engine speed in HSD is not proportional to vehicle speed....
Nope, it is just for PSD only. All the Prius generations use different final drive gear ratio: Gen 1 - 3.905 Gen 2 - 4.113 Gen 3 - 3.267...
Hi 70AARCUDA, The PSD is basically the same for all generations of Prius, all have the following gear ratios: Power Split Sun Gear: 30 Power...
Hi hybridbear and crabbyman, I've used different names in my spreadsheet because I want to follow the names used in Techstream. HVB amps =>...
Hi GuamKelly, Prius C uses the same aux. battery as the Gen 2 non-SKS. See my thread for the specs. of the OEM battery and you should be able to...
Hi Jason, It is actually for absorbing the torque fluctuation from engine. [ATTACH] Vincent
Hi KiwiAl, Yes, MG1 must be kept at zero torque and freewheeling to prevent ICE from turning. There is no clutch or brake for the ICE, it is all...
Hi Patrick, I'm not saying you shouldn't be bothered. My point is that all AV SW have their limitations. They depend on certain code patterns to...
Hi Patrick, I've checked my older driver against virustotal.com today, it says this file was first analysed by VirusTotal on 2011-09-27 03:46:58...
I think it is the volatility of gasoline that makes it difficult to display mpg accurately. There are 2 paths that the fuel is output from the...
Hi somainer, Yes, that is the one. However, unlike your Gen2, the steps to re-enable SKS are different. Pls see this thread. Vincent
Why would it be worse? The reason for the mechanical key to be integrated is that you could use it to unlock the door even if the fob battery is...
Hi Nakamoto, The customizable parameters are for US Prius and may not be applicable to your Australian Prius. Please check your Owner's manual...
Hi Lee, It is one of the customize parameters that can be changed from -3C to +3C. Ask your dealer or anyone with Techstream. [IMG] I've...
Hi KiwiAl, Mongoose MFC Interface by Drew Technologies is approved by Toyota. Others in this forum have use Tactrix OpenPort 2.0, Mangoose and...
Hi Prodarwin, I have both. I bought SG when I was trouble-shooting my Gen1 Bty problem, Mini VCI was not available at that time. There was no...
