Separate names with a comma.
You're looking for part number 55670-47070, but getting it from a salvage yard would be your best bet. All you need to do is remove the dashboard...
Not sure what you mean by homepage. Each of them links to the projectlithium page in their signatures, but you will notice a unique identifier in...
An easy tell is if they frequently provide referral codes in their posts.
I really hope you realize that those specific members have a financial incentive to sell more of those batteries.
I've had good luck with an OEM salvage yard pick for $19.
Could you post a picture?
If those lights are on, there will be stored codes. Read them off with a capable scantool (or even just a paper clip) and post them here so...
A low 12 V battery will struggle to provide sufficient power to run the brake booster pump (aka accumulator), and will therefore run it at partial...
While you may be doing it the right way in reality, this description is not correct, and performing it as you have described will not complete the...
Just checking boxes here, is the safety plug inserted correctly? One has to push it in, flip the latch down, and then slide the latch to the...
I you ignore the #18, the only one to take a washer and a 10 mm socket, there are two kinds you're left with: the thick ones (14 mm socket, 51 Nm...
Most of the FIPG material on the timing chain cover will be pressed out on its inside edge if the cover is torqued down within the 15 minute...
Finally got around to measuring this yesterday during a second rebuild. With the washer in place, there is a good 10 mm between the bottom of the...
Are these the same codes as in your first post? Are they historical, pending, current, or permanent? A screenshot from Techstream would be very...
If it's not a plug-in model, you won't get very far (or very fast) in EV mode. Since you say the only way the HV battery is getting charged is by...
This video may be helpful: [MEDIA]
Lewis Toyota and Serra Toyota generally have the lowest prices online. Currently ~$83 for each connecting rod. If you're willing to wait a little...
That's the new one from Toyota.
The first image shows where the head connects to the exhaust manifold. There are 5 studs that go into the locations marked: [ATTACH] The studs...
I slid the clamp to the right and then pulled the head up and to the left, cleanly disconnecting the hose in the process. You would first need to...
