Separate names with a comma.
Is the 20-25 MPG reading over a short drive or over a longer period of time? Any misfires at all?
And if you have any dents or peeling paint or cracked glass anywhere on the body, it magically fixes those too. It also self-cleans the EGR...
That does not seem to be what the manual recommends for an open circuit. It recommends you check, then repair or replace the harness that connects...
Replacing a bent rod is not difficult, and you can very well do it with the short block in place. I would also consider getting access to the...
Cleaned in place or off the vehicle? Fuel system cleaner poured in the tank can dislodge larger debris which will quickly clog the injectors'...
I do have the valves out. The reason I'm trying to clean the undersides is so I can get the suction cups of a lapping tool to attach. The carbon...
Any tips for cleaning the intake and exhaust valves of carbon deposits? Is there a coating somewhere that might be destroyed by a sodium hydroxide...
If arms = connecting rods, I replace one last time as it was very obviously bent. None of them were this time, so the original ones went back in....
The last rebuild I performed the same way on my daily driver is holding up well after nearly 3 years. No leak.
I didn't get too many pictures the first time I replaced a head gasket, but I'm taking the second one (on a different Gen 3) a bit more easy. It...
I don't think he advised against having a clean EGR cooler, and he also did not discourage DIYers from cleaning it out. For a paying customer that...
The OEM modules each have an internal manifold connecting the 6 cells and leading to a vent on top, and those vents again connect to one of two...
I've had that happen a few times. When it starts popping that false warning, there isn't anything one can do to remove the DVD. The usual control...
+1 for checking the injectors.
The ZJB program that you're likely referring to is not a recall, but more of an extended warranty. The 2010 is certainly not covered by it...
The butt dyno can't really pick up differences in cycle life, can it? ;) If a manufacturer is confident of the long term reliability of their...
The fact that something fails is not necessarily an indication of its quality. Put through enough loading cycles, any solid material will...
Dealerships techs used a rugged industrial grade laptop to run Techstream. For a while it used to be a 14.5 lb Panasonic Toughbook, but they may...
It's good to have Techstream handy, but you should be aware that neither the hardware nor the software in this bundle is "official" in any sense....
Any kind of discernible frequency of cycling of the accumulator pump is not normal, and means that one of the two components has failed. You've...
