Separate names with a comma.
The car-2008 Prius Touring PKG #6 177k miles, clean Carfax, clean title, no accidents, flood or salvage history. There are no aftermarket...
You can't go wrong with any clean Gen2 Prius with a good history. They are pretty indestructible. I personally would not pay the premium for the...
Glad to hear it worked for you. The two that I tried before worked initially but as resistance increased there was one block that was much higher...
I have put many sets of Kumho Solus on with good results. There are many different Kumho Solus KH16, KH25, KH26, KR21 etc. Although they are not...
I learn/see something new about Prii everyday. [ATTACH]
For any gen2 Prius owner that has an out of warranty car and wishes to keep it for a long time, I strongly recommend Jeff's grid charger with the...
I received the megger but couldn't figure out how to use it. The instructions were useless. I removed all of the bus bars and just used a...
Having the same issue. Car had a drained 12v, now message "program cannot be loaded. please consult to a dealer." followed by Japanese text....
It is a variable speed blower motor just like the one under the glove box. You don't typically hear it run because it runs at low speed and is...
Get a discharge ready grid charger like this one in the PriusChat shop but for 2001-2003 and run a few cycles. Hybrid Battery Preventative...
Also check to see if orange service plug on HV battery is completely plugged in.
Try disconnecting the negative cable from the 12v overnight and see if it will go into Ready in the AM.
When you disconnected the 12v the first time to attempt to clear the codes did it go to "ready" at all?
Just curious....why did you go with Mobil 3309 instead of OEM Toyota WS ATF?
Put it in D, move a couple feet, put it in P and then immediately try to power off. It may take several tries. It will eventually turn off.
TSB= Technical Service Bulletin If your check engine light comes on at startup and then goes out then this is just normal startup system check...
The problem with the combination meter is internal in the circuit board where a solder was done insufficiently. As circuit boards age the solders...
The camera doesn't work when the combination meter is blacked out because the indicator doesn't know it is in reverse. Your car will also be...
I would bet on actuators. I have only had to do a handful of these but the cars that I have done them on have had multiple doors fail typically....
