Separate names with a comma.
@Tombukt2 So I figured out that I and the positive and negative reversed, so I fixed that and everything worked except the up and down movement. I...
When you put the hybrid safety plug back in, you have to insert it, close the tab, and then slide the plug to where it clicks in place. Sliding it...
Well, here's the link to the passenger side. I'm still waiting for the mail for the new (used) power seat switch for the driver's side. :unsure:...
They make an adapter box (if I remember) that converts the factory plug to the connectors you need for the back of the new radio. I couldn't tell...
By the way, yes it will last along time depending on maintenance and how it was driven. I have 226k mi. on mine with original everything. It...
I agree. I have had a Ford mechanic work on my 2005 before it got totaled and that was the last time he worked on it. I either do the work my...
No, I'm not wiring it without all the fuses and relays and such. I don't want the car to burn down either. @Tombukt2 recommended that I look for...
I replaced my original plugs at 216k mi. on my 2012. They were still fine. :D
That would be good to do too.
I agree. Just get them from the dealership. They are even usually cheaper there than the denso ones at the local parts store. I might disagree on...
An engine hoist, if I remember right, are only like $150 at the auto parts store. I would get one to make your life a lot easier removing the...
I agree. That's what I'm going to do now, in between getting the switch. And yes, I'd rather not have to splice the wires. I keep you posted. (y)
Well, @Tombukt2 , before I went to finding the plug in the car, I wanted to make sure the seat motors actually worked. I have traced the wiring...
I'm doing mine the same way. Passenger side was first, then drivers side is next. I hotwired all three motors and they work, so I'm going to...
Cool. I was wondering about the seat belt clip, but thanks for the info. Glad I swapped it over too before I found out the hard way! Did you...
Okay. Well, that makes since, as I do have the power seat and heated seat fuses in the fuse block in the driver's kick panel. I will have to look...
I'd really like to install this, but now I'm wondering if it's possible due to the memory feature. If the memory seat wiring isn't an issue, I'm...
I have traced it back to determine that the three wires at the top are for the heater switch. The green wire is ground, and the white w/ black...
I don't have the diagrams of it, but I figured out from one of the threads that ground is the big green wire and the power is the white/black...
No, I'm not talking about a Gen 3 with memory seat. I couldn't find anywhere about this, so I'd figure I'd ask. I got a driver's side CT200h power...
