Separate names with a comma.
Is 65637-47021 the correct part for the passenger side, rear wheel well liner for a 2011 Gen 3 Prius hatchback? In the parts photo below, it is...
There's no vent on the 2014, he said he also has/had a 2010 as well, but he's currently working on a 2014. Our 2011 doesn't have a vent, but I...
I also run yellow foglights as DRLs. Do you have a link to this 13.7v triggered relay? I had one many years ago from somewhere in Northern...
Agreed, which is why I am trying out Valvoline Full Synthetic CVT fluid in my 2016 Toyota Corolla S Plus. Just doing drain and fills (2) so far,...
What was the mileage on the odometer? When I did ours at 30K and 90K there was no detectable pressure release as you described.
This part?...
The wife or the bird? /s [emoji16] .
Looks like we have a winner. [emoji41][emoji106] Here's an image showing the hood and front emblem. [ATTACH] .
It's hard to tell in the picture, but I have the hardware cloth folded over so it's a double layer. Secured with self tapping screws. Put a...
Lol, wow. If the c is anything like the regular hatchback, there is a much bigger area under the windshield wiper cowl that needs to be...
I believe I went from the same intake manifold part number in our 2011 to the same one you got. Mine came from a Lexus CT200h. Posted via the...
Yes, only to be used to place jackstands. [emoji106] .
Lol, here's an excerpt from an eBay listing for one of these jacks: "Oem “Widow Maker” emergency aluminum jack in perfect working order from a...
Thanks all. [emoji106] Very interesting... .
Saw this picture browsing items on Amazon. I've never seen a jack like this with only a single arm, like half of a traditional scissor screw jack....
Our 2011 at 114K didn't burn any oil, but the EGR cooler and EGR valve valve were about 75% clogged with oily carbon that was very difficult to...
I believe you have to change the entire headlight assembly. Someone installed the bulb incorrectly at an angle and the heat from the bulb melted...
A few more pics showing that I moved the PCV valve to the input (labeled out on the OCC), and more detail of the mount....
Here's some pictures of where my mounting bracket is attached. It is a bolt holding a bracket for the AC lines, I slipped an L-bracket under the...
This is the stainless mesh I used. I think I cut a 4 inch strip off the roll, then I cut that 4 inch strip in half to a 6 x 4 inch piece. Then I...
