Separate names with a comma.
I've had good success with Chevron Techron Fuel Injector cleaner fuel additive for clogged injectors due to cr@ppy gas. Haven't used it for a long...
There is an ECU wire protector cover sold for those exposed wires. ECU wire protector cover...worth $25? | PriusChat Posted via the PriusChat...
@eezybeezy, FYI the title should be rounded off the nut. Stripping the nut means the threads inside the nut were damaged, which wasn't the case....
Our 2011 Prius hatchback doesn't have a bleed bolt. .
Some of use never reinstall that PITA nut after removing it for the first, and last time. [emoji6] I've also removed the stud that the nut...
To the OP, yes, you want 9005 or HB3 bulbs. Plural, always replace bulbs in pairs. You can keep the working one as an emergency backup bulb, but...
Easiest way to narrow down whether you are dealing with a bulb or ballast problem is to switch the bulbs between the two sides of the car. If the...
260K miles, burning oil, cylinder 1 missfires, and coolant loss? I'm voting head gasket, even if your "testing" hasn't definitively confirmed...
Sorry, I don't know if they would help with your situation. I've been using HID, which have a wide input voltage tolerance. I'm not sure if the...
^^^ This. .
Locking socket extensions are good to have as well. I made do on my first plug replacement by taping the socket to the extension to keep it...
They sell spark plug sockets with magnets, or inserts, to hold the spark plugs for a reason. Save yourself the aggravation, use the correct tool...
Yes, but you would need to replace the output connector shells that would normally plug into the HID ballasts with these H11 female connectors....
Gen3, but thread linked for FIAMM horns. Upgrade at about half the cost of the Lexus kit. Horn Upgrade --- DIY | PriusChat Posted via the...
Search FIAMM high tone and low tone horns on Amazon. I highly recommend the dual frequency horns to replace the OEM horns. Posted via the...
Not if there's JB Weld in there... .
Is this what you are referring to? Southwire - 58280840 GRIP, PULLING 3/4" https://a.co/d/8gSc7vG [ATTACH] .
But now the plug and socket are glued together with JB Weld? [emoji51] .
That sounds like the root of the problem, I don't think a plug socket was used. That's why it was too short and the spark plug is now poking...
The OEM Toyota lugnuts on our 2010 Camry, 2011 Prius, and 2016 Corolla, for factory alloy wheels, all have a tapered end compatible for use with...
