Separate names with a comma.
Just replaced the front sway bar end links on our 2011 with 130K miles on it. Worn away rubber boots were pointed out to me at annual safety...
Regular "household" ammonia? Hmm, have to try it on my greasy, carbonized gas grill cooking grates (stainless steel), which seem to be very...
The Zep purple degreaser was OK for use on the aluminum inserts in the intake manifold? .
The bulbs are supposedly failing in your car due to a known problem with higher than desired voltage to the bulb(s). I installed HID bulbs and...
They were probably aware of some of the problems caused by their dealers' service techs over tightening the plastic cartridge housing for the oil...
The picture posted above shows factory LED headlights with the two convex lenses. .
Take a picture of the front of the headlight. If you have factory led headlights, then you will have two round convex lenses for the lowbeam and a...
Snow tires in Santa Barbara??? .
Yes, this ^^^ .
Yes, if the airbags deployed, there's a safety feature that prevents the car from being Ready. .
This discusses the Gen 3, but if the height of the open hatch on the Gen 5 is too high, shorter struts can always be sourced to limit the opening...
They will fit. The only problem would be between the Prius v wagon wheels and the regular Prius hatchback wheels as they are 5 x 114.3mm vs 5 x...
Yes, metal matrix composites use metal instead of resin. https://en.m.wikipedia.org/wiki/Metal_matrix_composite Posted via the PriusChat mobile...
Dumb question, but did you put your gas cap on tightly/correctly? .
I see my "Back to the Future" reference went right over your head. [emoji12] .
That's where the optional flux capacitor is bolted on. [emoji6] .
That's your oil change access door panel hanging down. You can get a better look at what part is hanging down in this thread. Lots of pictures....
$700 is a really good price for forged wheels plus tires and TPMS sensors inclusive. Why don't you ask what the last digits of the DOT number is...
Doesn't appear to be. I would probably design it with a larger removable panel in that area. .
Another member said the plastic material that the oil filter housing is made of actually swells over time, exposed to the heat and oil. I tend to...
