Separate names with a comma.
I did one with 253K on the clock, and the color match the paint color of the car.. Winter Grey... But never tried to smell it tho.. LOL Posted...
They should be the same.. 5 X 100 and 54.1mm center bore.. .
If vehical is parked outside, has anyone tried a 12V solar charger? I have one, the downside is that my doors won't lock when it plugged-in......
I had a tire that was loud, probable cause could be because of a bad wheel bearing.. I suggest to swap front tires with the rear one's and see if...
One thought on the clunking sound.. Have you checked the sway bar linkage? .
One realistic thought to consider is... With all unforseen part shortages among all auto manufacturers, how many Prime inventory will there be...
Looks like headlight leveling sensor link has broken... here's an image of complete sensor with housing and Link circled.[ATTACH] Posted via the...
What you read about is correct.. pay close attention to the drawing.. [ATTACH] .
Try this one, Good Luck! Watch "COMPLETE 2010-2015 3rd gen Prius Head Gasket replacement "how to" step by step" on YouTube [MEDIA] Posted via...
One thing to consider is the PCV valve... Might be a good idea to replace it, if hasn't been changed for a while.. Posted via the PriusChat...
Could a Lithium jump pack simulate 310 CCA from a regular Prius battery to start it? I thought jump pack function as an alternator to aide a...
From the info, I can see that block 5 (BB5) is the cause of your hybrid battery issue... I would start there, if you are able DIY .. Good Luck!...
Do you see the "ready" light? If not, your 12V battery is probably in need of attention.. .
It's pretty easy, procedure is same as replace hood struts.. Pop out the metal C clip on each end of old part with a screwdriver when remove it,...
You may want to disable traction control before proceeding? Or does that matter? .
Center caps are always a good idea, with or without hupcaps... .
I have good results by soaking it down with PB, and use a high power impact wrench to unbolt it.. good luck! .
I'm glad nothing bad had happened...Yet Make sure all connected wire/cable are disconnected from the traction battery before you proceed...
Photo 1(top)...2004~2005 Photo 2(bottom)...2006~2009[ATTACH][ATTACH] .
Air_Boss is correct, and good eye! The cover is folded backwards, need to unpin it and flip back towards rear of the vehicle where it originally...
