Separate names with a comma.
did the op mention that this is a NHW10 prius? If it is i think theres a charger built in the trunk for the HV battery.
I have 6000K on my HID housing lights. I also installed 5000K on the 01 prius with shields for glare
I have the same problem on my 01 prius, both the passenger side and driver side are shot the motors dont operate at all, im going to take it apart...
For years even since ive been repairing my 01 and 05 prius from a collision I have been trying to diagnose random issues on these cars, utilizing...
Just wondering... Did he specifically mention that the procedures are in error?
this used to happen to my car i pinned it down to a solar sensor once i erased the codes on the a/c ecu the problem went away
The tactrix cable costs 170 bucks and a friend of mine works at a Toyota dealer where I obtained techstream v5 evaluation and it has all the...
wow this never happened to any of my toyotas, it sounds very weird. the best thing you can do is remove the lense from the entire headlight...
making a wild guess here, but if there is nothing on the seat the airbag wouldn't go off since the occupant classification system doesn't pick up...
just to let you guys know i purchased a Tactrix Openport 2.0 and it works with techstream lite perfectly, also noting it also works with Honda HDS
there was a cut wire between the HV ECU and inverter, where is this wire located exactly, say if your standing in front of the vehicle is it to...
since the vehicle was in a accident, did any of those connectors on the front of the transaxle get damaged?
was this vehicle crashed? it sounds like there is a communication problem with one or more of the ECUs, im basing this on the assumption that...
whats typically the range you see your HV battery on the MFD?
Re: '06 Prius starts by itself i honestly never heard this happening before.
i wonder if the NHW20 engine will work, all i could think of a difference is the intake manifold and a/c compressor
would it be because the engine is starting up requiring the MG1 to spin up to ~3600 rpm-3900 rpm to spin the engine to like ~ 1200 rpm? im not...
i beg to differ on that assumption, the NHW11 hub and bearing assembly looks exactly as the setup on the NHW20, most bearings can be replaced. i...
the bearing can be pressed out with a hydraulic press, and you can press the one in. This is what i did on my 2001 Prius using the original hub....
i bought one of those USB CAN bus obd2 things on ebay and I attempted to use autoenginuity with that USB adapter but it will not detect and im...
