Separate names with a comma.
I too have just ordered from NewPriusBatteries and look forward to extending this 06' prius with no other problems. I dabbled in module...
And I too will probably be joining this group, my trusty 06' prius with slightly over 70k with no out of ordinary problems just developed the...
A couple days ago I took the blower out and tested it on a hefty bench supply and it blows a LOT of air at 12v and draws around 5A continuous...
Yes there is an airflow sensor in the exhaust ducting.
Yes thank you for the info., I know about Boulder Hybrids. Been there a couple of times. Update: Am trying to get emissions test on airport road...
I'm at the point where to go any further will require pulling the safety plug. By doing that will cause an open circuit about 1/3 down the pack,...
The car has 61k mostly around town.. Auto Enginuity does scan the car for dtc's but there are none. Yet! It does scan the Bat ECU. But that's not...
[ATTACH]
Thanks for that link, yes the scangauge xgauges I already have the useful ones but they don't list many either. The most informative ones are BTV...
I agree the SGII is mainly a "listening" device, not a commanding device. That's exactly what I think I need is a bluetooth adapter and the...
The battery fan fuse is 10A.
I see epoch_time had the same or very similar issues a few years ago, including my observations of over 5A current draw on the blower motor. but...
That's an excellent link SFO, do you know how to force say a level 3 blower speed continuous on the SGII? I have one in there and it monitors SOC,...
Well I didn't ever hear it until recently after I heard a "pop" back there on a hot day going uphill but no blower noise! So I took the blower out...
Can someone walk me through how to do force perhaps a level 3 on the battery blower using the SGII.
I believe that is correct, blower speed is determined by temp, and there's five temp sensors in the pack. Depending on where those are placed...
Good point, I assume by "remanufactured" they have them built by someone. They sure look brand new. You can tell a refu8rbed one by the...
I wouldn't use the drill to loosen the buss bar nuts, use a small ratchet to break them lose! Otherwise you won't know if any were already lose!...
Here's the gen2 video, [MEDIA] and pretty much where I'm at. Another thing I noticed is if the 12v neg is not disconnected, it may get a dtc...
Here's some of their videos Installation Videos – Electron Automotive I like to disconnect the neg. of 12v aux battery as well right...
