Separate names with a comma.
I am having this same code P3000-123. Wiring harness appears to be in good condition. Traction battery ECU is actually in the battery itself (not...
Greetings, Installed a rebuilt HV battery in my daughter's 2002. After the installation it displayed the Triangle of Death. Ran the codes on...
Thank you. Looks as though the service plug housing might have been damaged in shipping. I will start there tomorrow.
Greetings, We ordered a rebuilt/updated traction battery for my daughter's 2002. It came with an ECU already installed. I have installed it and I...
I wanted to provide an end result to these posts. Turned out to be a bent rod in cylinder one. My daughter decided to sell the car as opposed to...
Thank you. I will check that out.
Based on a little more research, it appears to be a bent rod in cylinder one. We are currently opting for an engine swap. Anyone know of a good...
Thank you. I will do a compression test using my TechStream.
I replaced the headgasket on my daughter's 2012 Prius Two. Following the 6 -7 "test drives" I've taken it continues to register the P0301. I have...
Current P0301 Engine misfire First a little background, 2012 Prius 2, replaced head gasket. During this repair, when reinstalling the timing...
The shaft for the sprocket on the oil pump is flat on one side to correspond with the inside of the shaft housing on sprocket and timing dot. So,...
Thank you. I was wondering as if it makes any difference in how the oil pump is timed. I guess those marks are there for a reason so I might as...
2012, 3rd Gen - Does anyone have a diagram or picture of the correct sprocket and timing chain mark placement for the oil pump when engine is tdc?...
Greetings, Replaced the head gasket in my daughter's 2012. Timing has been my challenge. Set it according to the repair manual, but didn't...
Just replaced the head gasket on my daughters 2012. When I put it back together, I discovered it had went out of time by one tooth on the crank...
I took off the valve cover and looked down the chain. Holding a screwdriver against the chain, it appears the tensioner released and tightened the...
I'm coming to the end of a head gasket replacement on my daughters 2012 Prius. My last task this evening was placing the timing chain tensioner....
In addition to making the correct replacement, it is important to bleed all the air out of the coolant system. Runs like a charm now!!! Thank you...
FIXED!!! Inverter coolant pump replaced. No codes! No leaks! No air in the system! No blown fuses! Thank you for your assistance.
UPDATE: Thinking I was replacing the inverter coolant pump, I was actually replacing the coolant flow control valve. Crazy mistake!! Argghhh......
