Separate names with a comma.
Sweet ride, good lookin wheels. Try Ragingfit's trick of raising the coolant reservoir. That worked wonders for me. I used a bungee cord and long...
I remember when I lubed up the caliper pins on all the brakes. The rear brakes had these metal clips loose on the drivers side. I had minor...
I can confirm the TRD Prius plus sway bar fits 2014 Prius V. I just took mine off 2010 Prius regular. Bolted right up I used the new Moog links...
SC16HR11
I swapped the plugs. I drove around fifty miles with the AC blowing max. I was trying to drain battery to make ICE turn on more frequently. I was...
I pulled the plugs on the 16 motor. They had FC16HR-C9 installed which are gapped at .035. The spark plugs for a 2010 Prius calls for plugs gapped...
I'm using the plugs that came with 2016 engine. Sometimes when the ice kicks on I can feel the idle drop a bit. Causes a slight shake. Not every...
Hey that looks like my hood ! I was thinking of wrapping it with carbon fiber vinyl.
I put the thermostat back in, rerouted hoses into the heater core but bypassed the heat exchange recovery system. Temperatures are in line what I...
Question for all the 16 engine swaps. What spark plugs are you guys using ? The plugs for 2016 or the 2010?
Sssssold. I'll take em. I've got 4 prius that will eventually need their coolant changed. Theres a new part number they used to have a yellow cap...
5144212210
I took out the thermostat and bypassed the heat exchange. Been driving last few days 10-15 minute drives. Today had the courage to drive it to...
I have it loose while filling the system till coolant drips out then close up. I'll pop it loose with car running until I see a steady stream of...
Took a break from troubleshooting. But i'm back at it once again. Got an IR gun to measure temps all the different hoses. Pretty much all of them...
You can see on the stopper it has a channel on one side. Should the channel be facing the actuator or away ? Thanks for posting the diagram.
I've been working on the exhaust recovery tank. I was using compressed air to blow out the exhaust actuator. Took awhile to pop that sucker out....
Going to boil the mix and pump into exhaust recovery tank see if any more garbage comes out. That way with the heat I can see if the actuator...
I've tried three thermostats, two water pumps. Two oem and 1 Gates brand. This was my original thermostat with 188k old motor with blown head...
I replaced radiator thinking that was causing my overheating issue. But that wasn't it. I did see some residue on one side of the radiator, near...
