Separate names with a comma.
Here is a graph showing relation between kW and rpm. [ATTACH] You can see that the relation is not one to one. There are several rpm with...
Hello, 2009Prius I won't answer your question. But remember that "run distance since last DTC clear" is limited to 65535. On my car this pid...
Hi 2009Prius Your graph look like one i published two years ago: [IMG] In this graph you can see: -accelerator pedal in yellow (multiply by...
Re: Response time? Re: CANBUS PIDs I just unplug usb side and odb2 side. Unplug usb side is not necessary. I do this because the usb plugs (one...
Thank you, pEEf But when you have only 10% Soc your voltage is 235v that is 3,26 v per cell. It look high regarding A123 discharge curve, i...
Re: Response time? Re: CANBUS PIDs Yes but you have to change a little for multi-frame message. 1) Send 7Ex yy zz.... 2) receive one or more...
Re: Response time? Re: CANBUS PIDs It can be more easy: -initialisations (500kbps, 11bits ...) (Open, Connect, Startmsgfilter) -a loop in wich...
When driving with Nimh, a nominal Soc (63%) and no current, the voltage is betwen 220 and 230v. Not 201v. 240v is at the beginning of your...
During run time you need op20pt32.dll But i don't remember if the op20pt32.dll is in this drewtech package. Thank you pEEf. But Sd card is not...
Before buying Tactrix, you can see full samples writen in vb6 from drewtech. You can also use C. Before programming you have to get the J 2534...
Re: Response time? Re: CANBUS PIDs 2009Prius. Timeout and ftdi buffer size are explained in this pdf. (Frenchie find this last year)...
I check on same log to see the delai between sending a request and the response. Between this request and response my Tactrix Open port 2...
I am really very impressed by what you have achieved.
Yes i believe also 0x020 is a timer or some sort of mark. Nothing interesting inside. RPM You realy have to multiply byte 3 by 32 (only one...
Look at this nice job from attila vass :http://www.vassfamily.net/ToyotaPriu...PriusCodes.xls
Yes, i confirm 50°C ofset for inverter_MG1, inverter_MG2, MG1, MG2 and boost_converter. But 40°C for catalyst., intake_air_temp, outside_temp...
