Separate names with a comma.
Lopezjm2001 I have some file *.hex copy on my pc: BL2sept023, BLjul243, BLoct162, BRapr029 If needed I can add some on a post.
Bms2 or bms+ don't like when 12v power have voltage drops. In this device there is a voltage regulator and capacitors, but the two microprocessors...
chiffis. It is possible you have some bad data on the can bus. I hope you have connected nothing else then bms2 on the Nimh ecu 12v wires,...
There is an official path on the left side of the car. See pages 15-19 in this manual You may not damage a wire, there is no wire there.
Hello elman1. I don't sell anything. Sorry. I only help diyers. We are 4 diyers here in France using this plug-in design. I use A123 20Ah cells....
The first would be to remove the nimh cells and then replace with 30kg (66 lbs) LG cells. This would add 6.5 kWh (more then 5.5 kWh usable) so 69...
all It was a challenge. Going to the nearest beach and back without gasoline and without pluging my car during the trip. Theorically 101 km...
Hello, It is 100% DIY You will read a lot of details in this thread. May be Lopezjim can explain all this to you ! He live in Australia too....
Nice result.;) One other exemple : 179 Mpg, (Or 1,31 L/100km) and 8,34 kWh/100km during 35000km (Or 21800 miles) with my P2 that has -9kWh A123...
Glyndwr. In summer you need about 4kW on a flat road with tires well inflated. If your voltage is 230v then the amperage is between 17 and...
Thank you so much, Norman. I have been using your bms+ since 2011 and it works perfectly. Url : Hybridinterface :)
Bonjour, Le ET c'est le déport (wheel offset) Sur les jantes d'origine c'est 45. C'est gravé dans une des 5 branches de la jante. Il ne faut pas...
They don't have any valve. So if any "abnormal chemical reaction" append they will inflate. If they can not they will leak. So if pressing them...
wb9k. Do you know why pressure is recommended ? A123 cells are flat and when not, say inflated, have been damaged and have to be replaced....
Thank you Lopezjm2001 for this picture. Tab thickness is 0.5mm It seems that there is say 8x1x0.5mm so 4mm² only between these holes for this...
Dan2l You probably know that these 16 charger must then be insulated, that's to say with a transformer inside. :)
Yes I don't remove my cells when charging. It is possible but they weighs 75 kg. But except one time my car stay in our garage. So cells temp...
Fwd The less I saw was yesterday (car was outside all the night): 0°C outside air temp, 5°C lithium and nimh temp. In summer the internal...
Did you test in OOG mode or Hybrid mode ? Here, in France, we don't have any coolant heat storage tank. So I cannot test this pid. :)
Lopezjm Yes, B1S1 and B1S2 are sollicitated pid and give you the 2 catalyst temp (computed values). I used this pid years ago when using...
