Separate names with a comma.
Have you noticed that the DOD was 91% ? (17.9/19.6) And amperage was 41.8A so more then 2C One minute later the lowest cell voltage was 3.06v,...
That is interesting. When did you have 77 amps ? When cells were fully charged or when depleted ? I suppose that when fully charged this is the...
Here the 70 voltages after 38km, 3918 Wh and 17,9 Ah with the 4,5 kWh plug-in. [ATTACH] This graph is during driving.
Why worse ? Canview only see what is going through the hall sensor. Not the coulomb that your lithium send to the nimh. Canview will see what your...
I think they where not totally depleted..., except one :)
Today, using 8.2 kWh (36.8 Ah) my plug-in prius traveled 81km with only one cells charging. I used oog mode. The 140 cells have 9.1 kWh theorical...
In my album called "can" These connections are made for cells without tabs. If I have to do it one more time, I would really prefer cells with...
When I used the "old" ;) 4,5kWh plug-in, in order to drive 40km I first connect lithium on nimh during half an hour, not more. (That was not...
all. Yesterday was a very nice day. Just begining testing my V2.0a+ plug-in prius. This version has twice the capacity of the previous :...
I use also this mode as you can see on my today's mfd. [ATTACH] and like it so much. 99.9 L/100km equal zero gasoline ! unlike 0.00 Liter/100...
Because this problem append after connecting a wire on canview, then it can be your wire added but also it can be the can wire on canview that is...
What is strange is that you have this problem only in phev mode. If not I would check bms+ connector. May be a bad contact. Can bus would be...
No, never had red trinagle during driving. Is it only when pressing the brake pedal ? What was bms+ end_voltage ? Are you sure that your ev200...
Re: Happy Plug-in Supply Customer Hello, Kruz. Could you post some pictures of your 10 kWh kit, please ? :)
The problem is that these cells accept only a max charge current of 80A. Your Prius can send 100A. So you cannot replace the nimh cells with...
4kWh 76 cells 3.2v Do you have headway 16Ah cells ? (P.S. I still don't understand why PIS call this a 4kW kit (same for the 6kW, 10kW..)....
Graph was done with 70 A123 cells, from 40% depleted to 80%. Because you love pictures, one more: :D next project comming soon with 144 cells,...
When you connect the lithium, the internal resistance is very reduced. So voltage don't go high during braking.(Except if your lithium cells are...