Separate names with a comma.
I think the resistors are the same. They are on the 5-12v side. They very probably use the same voltage (5 and 12v) on all their model.
Your heater is, I believe, just a resistor. So the amperage during discharging was not constant. Your voltage begin, I think, near 241 volts. So...
Flying WD Your charger send 5A maximum. So when charging voltage is 240v power on dc side is 1200w, not 1500 watts.
Two A123 20Ah in parallel.
You could use some google translation. It is often funny but sometimes understandable. :D 5 packs is because 70 A123 cells 20Ah. 70 cells have...
Hello, Europ. On priuschat pEEf has done this. On this thread we all keep nimh connected. There are always taxes somewhere.:o The less...
Only when temp will be too cold. Cells will weight 80kg. It will take more then a month to connect all new cells, make new boxes ... :)
I will add more cells :D because I have also longer trip then 38-40km. And I will test 72x2. So 9360Wh. Using 85% DOD = 8kWh. Elcon "2.5kW" send...
Inside temp is between 17 and 20°C now, in winter. My charging current is 2A only because I use a small power supply (500w). But I will use an...
Yes cells stay in my home when not driving. Now with outside temp like -8°C :cool: it is interesting. It is also interesting in order to reduce...
Lo :D Why do you say 3.8v ? Is your problem more because 3.6v (bms) is a little under the 3.65v (charger) ? I suppose that your bms have...
FlanInaCupBoard WFD want to use just bleeding individual cell. These won't manage the charger. What you explain need a bms that will stop the...
There are different commands in order to clear dtc. One clear all dtc "at level 0". Some clear dtc in one ecu at a time. Because you have only...
Canview could display "out of gas". Because it is canview that clear the dtc, just before clearing, this dtc code could be read and stored. But...
The answer is very difficult. You have two chemistry : nimh and lifepo4, not the same capacity, not the same internal resistance and not the same...
Yes, when amperage equal zero, charger voltage equal cells total voltage. At the opposite, when charger send the maximum amperage there is a...
This is an analogic modification. You have to open the charger. The waranty is lost then. It is really better sending 2 to 5v between pin 1 and...
The answer is not easy. I drive since more then 4 months with lithium packs and 254 kWh have gone in and out from these 70 cells. That is more...
The consumption is 0,5 mA or 500uA. 0,5mA for one cell at 3,3v And 0,5mA for 70 cells at 230v.
Zero,no. We are in winter. 38km is possible in summer in 100%Ev mode. For this trip, I used 0,21L of what we called SP95 and 3,7kWh; 16,9Ah So...
