Separate names with a comma.
Awesome, glad its running. Swap the coil pack with another cylinder and see if the misfire follows. What happened to the water pump? Those are...
Ah ok. I kept my gen 4 egr stuff in a box for possible future but the engine I bought did not come with the gen 4 exhaust mani.
If it runs on the gen 3 and not the gen 4 then something is wrong with the gen 4 engine or install. The ECU doesn't know the engine isn't the...
Good luck on your swap. Its one of the easier swaps I have done. I also have a 2000 MR2 spyder with a honda K20 swap and turboed. 520 whp.
I dont know if you got an answer yet but yes a 19 engine will work. My 2010 has a 2020 engine.
I can try but its kinda buried in there under the inverter. I didnt do anything except use a new thermostat. i have driven 300ish miles...
So I used all sensors from the gen 4 engine on both swaps I just did. Both used gen 3 EGR and O2 sensors, and gen 3 intake so the sensors on that...
Here is how I did mine. I didn’t like that part hanging out the back so I soldered it after I took the pic. I bought a ring terminal from the...
I think you need to check those grounds again. Terminate them correctly and bolt them down.
Both cars I swapped were 2010s. 1 got a 2017 engine and one got a 2020. Your car is absolutely compatible with a gen 4 engine. I would say just...
Don’t waste your time on a head gasket or gen 3 motor. If you can afford it just buy a gen 4 motor and be done with the issues.
Did my other swap today. Ended up using all gen 3 hoses. I cut the metal “S” shaped water pipe at an angle that worked for me and left the coolant...
I did this swap last weekend and am doing another one this weekend (if parts come in in time) and I ordered both hoses 16573B and 16571C as well...
Its much easier to leave the trans in.
Ask them to sell it as is and swap a gen 4 in.
