Separate names with a comma.
I find it astonishing myself! As you can see from the picture in post 22, they use a fixed 60hz transformer for the power supply. I bet the UK...
Are you sure you don't have the pins backwards? Looks like you might have 2 and 12 jumpered instead. Effectively, The view is from the back of...
LOL! I said as I meant; The Battery ECU has no communication means other than the CAN bus. It would be pretty silly of Toyota to run the CAN bus...
So the UK Leafs come with a 10A EVSE? Interesting! Is it also made by Panasonic?
Not Relevant
The response has been good! Lots of you have sent your EVSE's in for the upgrade. I'd love it if you posted your experiences here on how the new...
Yes, VVTi only modifies the Intake timing, but it can move it such that they don't open for the intake cycle, and thus no air=less to pump.
Yes, the HV ECU won't allow MG1 to overspeed even if you run out of gas, etc. When it spins the ICE, it sets a CAN frame the puts the VVTi in a...
Google is your friend, search for "TIS Mangoose". Be sure it doesn't auto-correct and substitute MONgoose for MANgoose!
The original design in the EVSE included a "fixed" 120V transformer for powering the EVSE. Here's a shot of the un-modifed EVSE. Note the...
Both! Adding a 4th would balance the power so all antennas had the same power, but it's still going to be less. The only other way would be to...
Yes, this could be done, but it would not be an easy thing to implement, as it would require the addition of non-trivial circuitry. The...
This may vey well keep them out of the inside, but it will not keep them from under your hood. Several members have reported damage due to chewed...
I toured the TMMK plant in Georgetown and was very impressed! I would have no compunctions about buying a car made there. I personally saw...
I'll say again; this MUST be a problem with the 12v battery or it's connections. The only way the MFD and clock will reset, is if the battery...
Update: We have completed rigorous beta testing, and are now offering the upgrade service for these to Leaf owners. Please see [THIS] web site...
Be warned that when you swap the CM (Combination Meter) to another car, or install a new board, you should perform the inclinometer calibration....
Yeah, I've done this, it's not fun. The trick is to get the tension correct and balanced so the door is "light". The other thing I learned is to...
Project Better Place is supposedly installing the Battery Swap station. Most of the Taxis in SF now seem to be Gen 2 Prii, followed by Hybrid...
A Volt-Taxi doesn't make any sense with it's horrible mileage once the battery is dead. The only way a battery-powered taxi makes sense is if you...
