Separate names with a comma.
What are you driving? Your profile says 2009 (a gen 2) and your post is in the gen 5 forum. I have neither; I have a gen 3. But anyway, in my gen...
I wouldn't worry myself just over seeing the chain go limp-taut-limp-taut between the sprockets. The cam lobes have strong valve springs riding on...
The nick on the face of the intake manifold doesn't bother me, but the photo at an angle shows most clearly that the nick has edges where the...
My angle perception is off in the same way. I think it's pretty common. I've come home after a bike ride and looked up some hill on the map and...
I find "different code language" to be an unlikely explanation. The codes are transmitted in a dead-simple 'language' that OBD-II standardizes...
Mine has 14.7 and 13.5 or so in its repertoire. I agree with you in dismissing a simple loading effect. It looks very much like programmed...
Which was your favorite way to determine the height of a building using a barometer?
PriusChat won't let you say dun no, but will let you say dinna. What's for dinna? Dun no.
My father bought a used car once whose previous owner had done that. It became my job to remove the seats and carpet and replace all the melted...
Thank you for following up. No worries about the English. If I'm right, I think you're saying "not any scanner" displays a sensor number for that...
My gen 3 also makes adjustments like that. It will use a higher voltage, 14+, to charge the aux battery faster if it thinks the aux battery charge...
During the linear solenoid offset learning, the car tries a sequence of different control values for the valve and observes the brake pressure...
Codes in the C0 range are not Toyota-specific; that range is standardized by SAE. [img] So you don't have to find a Toyota-specific document to...
I have to kind of translate your numbers into Celsius, because the car's Japanese so of course all the interesting points programmed into the ECUs...
I think jmyntrn was referring to the ordinary resistor shown in the photo in post #12 from Bob k. Bob k wasn't the OP in this thread and didn't...
