Separate names with a comma.
The information on DTCs are limited. Need to convert from decimal to hexidecimal. 4 53 1 A 93 0 0 0 Just checked my notes according to the Vass...
The information on DTCs are limited. Need to convert from decimal to hexidecimal. 4 53 1 A 93 0 0 0 Best to use Techstream (Chinsese clone) like...
I had the same problem of dying 12v batteries before. Like you I also have a PHEV kit and other added components which may be putting a small load...
Try this one at the usual place in my first post of this thread. I have just uploaded my latest MMbasic 4.4 Canview program....
Hi Patrick, I do not sell anything. DIY stuff is not easy to understand. My only advice is to keep reading and trying to understand what to do...
I was just reading on another thread of an IPad application called "Engine Link HD" for $7.49 which now supports a Torque custom PID file. Just...
I checked it out. It only happens if you are logging. Easiest solution is stop logging if you want to see F5 or F6, for the time being. This is...
I also noticed this, possibly a timer which is not being reset to 0. Let me know if you see the problem. I will look into it later. Thanks....
Not sure. But probably because I was only logging the HV battery voltage and current. Updating is faster if fewer variables are logged.
A second hand PIS kit is for sale at this thread: EV Kit Plugin Supply 10KW - used | PriusChat I just thought that subscribers to this thread...
Just uploaded my latest CANVIEW basic program. It includes the logic for the EV Display Unit used with bluetooth modules from cleanpowerauto.com....
It looks like it includes a ECM spoof board. It is the small PCB with two white wires and two black wires. Allowing the Prius to go up to highway...
EV Display Unit Version 3 [ATTACH] Moving along...... here is the latest page I have added to my CGolormax2 or/and Duinomite Mega. I have...
Let us know if your tyre and cable gets pinched.
The Enginer BMS uses a small PCB relay for the LVC. The large relay is for the HVC to stop charging. You will need to trace the PCB tracks to find...
Hi Jason, The converter shut down is very simple. The relay in the BMS16D closes the contact when the cell is under 2.5V. This is done via the...
Are you planning on using the contactor to bypass the Prius current sensor? If not then you only need a relay to switch off the DC Comverter for...
Thanks for the photos. The cells fit really well. Maybe modify the box lid so that the cells are not covered by the metal lid. Maybe move the lid...
Maybe ditch the box and use the open air architecture of the latest version of the Enginer kit. The open air architecture will allow the DC...
It looks like you are using a good quality Gigavac contactor with a auxiliary contact for feedback. The only thing missing on the EV Power BMS is...
