Separate names with a comma.
Hi Frank, Thanks for your replies!:) Yes, there are 2 PIDs for MG1 Torque. One for calculated torque (MG1 torq) and the other for actual...
We don't have big temperature swing in Singapore so I didn't pay attention to the difference in OAT. After all these reports, I took my digital...
If our OAT gauge is the same as Gen3, then I think it fit what the Gen3 Repair Manual describes: If you let it sit for longer time, it may climb...
ORNL did a test on the Gen2 and reported 50°C was not exceeded in a mild urban drive cycle, while 60°C was not exceeded in the most demanding...
For 162C, the insulation class has to be Class H. Class F only up to 155C. [IMG] From the graph, 162C is approx. at 100,000 hrs or about 11.4...
OK, that explains it. You still need to put in park, just the sequence is different. The C with SKS doesn't have park button so the behavior is...
Hi Tonyzenmaster, I believe what you describe is the brake accumulator sound. I have the SKS but the brake accumulator should be the same. If...
I have SKS so I looked up the US user manual on pg 159: How can you remove the key when the shift lever is not in P? Vincent
Hi CMJAnew, UG cannot display Inverter Temp, only the SGII with Xgauges can. See my post on the list of Xgauges. Vincent
According to their website, UltraGauge currently does not support Manufacturer specific gauges such as Transmission temperature. Vincent
As stated in the warning, the transmission may be damaged if service mode was not reset prior to road test. So, use it with caution. There are...
You asked for it.:D [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] MG1 first exert a more negative torque, negative rpm (Generator Motor mode)...
You asked the right question, we'll wait for Frank to response... As per my understanding, MG1 cannot apply any torque in order to keep ICE...
It is generated by Techstream. I 've the mini-VCI but the data was actually captured by Paja using his Tactrix cable on a Gen3. He sent me his log...
Hi Eric, Yes, MG1 has zero torque when ICE is stationary, only MG2 is delivering the torque. See attached image circled in orange. [ATTACH]...
According to this patent, MG2 has low efficiency in low output range. To solve this problem, rear motors with high efficiency at low output range...
Mine is on the right side (RHD). My previous Gen1 is also on the right side. According to the Gen1, Gen2 and Gen3 Repair Manual, the Solar Sensor...
AFAIK, no one has succeeded using ELM327 yet. Only J2534 devices using Techstream can do that. ScanGauge II and TPMS interaction | PriusChat...
Yes, you're right! Charging should be -ve and discharging should be +ve. NameShortNameModeAndPIDEquationMin ValueMax ValueUnitsHeaderHV battery...
Hi deckbuild, Yes, it does. Ver. 3.xx can't handle multi-frame msg., only Ver. 4.xx onwards can. See my other thread. Vincent
