Separate names with a comma.
Pls test this PID for RMG rpm, it should be proportional to vehicle speed and MG2. NameShortNameModeAndPIDEquationMin ValueMax ValueUnitsHeader Rr...
Yes, some PIDs have to be inserted for RMG or MGR (Rear Motor), so some of the PIDs have to be shifted. I'm trying to decode the log file. Vincent
1 HV Battery = 15 Blocks 1 Block = 2 Modules 1 Module = 8 cells 1 cell = 1.2 V nominal Total HV voltage = 15 * 2 * 8 * 1.2 V = 288 V nominal OBD...
Your PID Map for HV ECU is almost the same as HiHy except for 21D1 which HiHy does not have. Vincent
Nope, what I meant was to change all the 7E3 for Gen2's Battery ECU PIDs to 7E2. Here are part of your log file that let me to believe that the...
Hi SynEco, Sorry, I didn't realise that you've already set the headers correctly. I was confused by the results of your log file and didn't know...
Hi robbio, Thanks for the great info! They share the same platform but I need to compare your data with SynEco to know for sure. From you...
I think you did not set the Header. By default, Torque will use 7DF if you did not set the Header. 7DF is functional request so any ECUs that are...
It is the New Car Features and you can download from techinfo.toyota.com. Vincent
The PIDs do exist. Check out Air Inlet Damper Targ Pulse or Air Inlet Damper Actual Pulse: RECIRCULATION: 19 FRESH: 7 From the NCF: The Air...
No, HV battery is not connected in Ig-on, only in READY. [ATTACH] Vincent
What you are seeing is the Fan does work in ig-on but no cold air coming out from the vent. The A/C compressor is powered by the HV Battery, so it...
The HV relay is closed only during [READY], not in ign-on. I don't believe you can turn on air con in ign-on. In ign-on, the Battery ECU is...
I wonder if you have tried AT CEA 2A? Page 44 of the ELM document has some examples of using CAN Extended Addresses. Vincent
How about the other 3? The Information code can show up randomly on any one, not necessary from 1 to 5 in sequence. Vincent
The scangauge website has copied my older version but has not updated to my newer version. Bob has just pasted my latest version into the Sticky...
Hi Jack, You have to use the Xgauge function. Here is a guide to enter the Xgauge parameters by Navguy12. The subcodes are the 3 digits code...
Hi nimblemotors, P3000 should at least have a subcode or Information Code. Can you try to see if you can get any response for all the 5...
It happened to my Gen 1 once. It turned out my Lock Release Button on the Shift Lever was stuck. After pressing it several times, I was able to...
For ISO 15765-4, the DLC is always 0x8. If your data length is shorter than 8, then trailing padding zero's must be added to make up 8 bytes....
